Zyxel NSA-220 failed disk replacement

Marvell Orion based
Locked
geo782
Posts: 2
Joined: Wed Oct 22, 2014 4:03 pm

Zyxel NSA-220 failed disk replacement

Post by geo782 » Wed Oct 22, 2014 4:19 pm

Hi,

I have a NSA-220 with 2 hard disks raid 1.
In Storage -> Internal Volume i have : Status: Recovering:0%, Volume:mirror_1, Disk Configuration : Data Protection (RAID1), Disks :Disk1, Disk2.
If I press scan the second's hdd Led turns red and a message says that i have to replace hdd.
I have bought a new one with same disk space to replace it. If i shutdown NSA-220 and replace the faulty harddisk and power on, go to Admin -> Storage, i can't see any internal volume.
If i put again the faulty hdd (after i shutdown nsa, replace and power on) I can see the raid configuration?

Is it something different that I have to do or do i lose data?
Perhaps i have to change hdd while the nsa works?

George

Mijzelf
Posts: 6206
Joined: Mon Jun 16, 2008 10:45 am

Re: Zyxel NSA-220 failed disk replacement

Post by Mijzelf » Thu Oct 23, 2014 7:14 am

Reading this I think you have to exchange the other disk.

geo782
Posts: 2
Joined: Wed Oct 22, 2014 4:03 pm

Re: Zyxel NSA-220 failed disk replacement

Post by geo782 » Thu Oct 23, 2014 1:22 pm

Thank you for the reply,
It seems that previous Administrator had changed first harddisk but he couldnt repaid the raid1 because second harddisk is also fault.
I created the raid with the 2 good hdds and its ok.

Locked