Ethernet disk mini v2
3 posts • Page 1 of 1
The I2C EEPROM contains a halt/reboot flag (7th byte) and also a WOL flag (8th byte).gerdich wrote:I've seen by the Wiki and the associated thread that somebody was able to enable the "halt" flag.
Is it possible to enable at the same time wake-on-lan?
However I don't recommend playing with the WOL flag
I haven't tried myself but ruben changed it (from 0xFF to 0) and wound up with a bricked EDmini V2
He then had to use external hardware to change the WOL flag back to 0xFF again.
See this topic and the discussion on the email@example.com mailing list here.