Ethernetbigdisk OS restore

Post Reply
mono2
Posts: 5
Joined: Tue Dec 29, 2009 10:55 pm

Ethernetbigdisk OS restore

Post by mono2 » Wed Dec 30, 2009 12:07 pm

Hi all,

Ive been going through the forums and have tried various suggestions from various threads but im still stuck.

I followed the thread viewtopic.php?f=146&t=611 to the letter.

I had to recreate all the partitions on the main boot drive in my EBD. I then copied over sdba 6,7,8 as available on the site and formatted 9 as per a thread on this site. I still have no luck booting the EBD. When I view /var/log it is always empty, and even on boot the drive reads for a brief second or two on power up and then sits silent for the rest of the time.

Any suggestions on what I could be doing wrong? Do I understand correctly that only sdba 6,7,8 contain the OS, rawimage etc and the other partitions will be created on boot up or is there supposed to be certain data in the others aswell?

Post Reply