General NAS-Central Forums

Welcome to the NAS community
It is currently Tue Aug 22, 2017 8:26 pm

All times are UTC




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon Oct 31, 2011 3:31 pm 
Offline

Joined: Mon Oct 31, 2011 3:28 pm
Posts: 2
I have a Lacie Ethernet Bigdisk and have forgotten the admin userid / password.

The Admin / Admin default does not work any longer

How can I reset these please ?


Top
 Profile  
 
PostPosted: Mon Oct 31, 2011 4:18 pm 
Offline

Joined: Mon Oct 31, 2011 3:28 pm
Posts: 2
I found this post:
http://forums.techguy.org/hardware/6938 ... admin.html
which says:
-Turn the drive off -When pushing the power button to switch the drive ON, keep holding the power button until the blue LED of the power button starts to flicker and then release the button. -Then, after 1 or 2 seconds the button’s LED should flicker with another rhythm. -Push the button again. After a few seconds, the LED will flicker again but with a third different rhythm. Release the button. -If the drive turns off then the power button was held in two long during the last step, please try again if the drive powers off.
Every time I try this step my drive powers off which seems to indicate that I am holding the power button too long during the last step....I have repeated this 5 or 6 times but every time I try my drive powers off !
If I am following the right steps how long should I be holding the button down during each step ?
Is there some other way to reset the drive please ?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group