Single 4K Sector Disk in d2 Ethernet Big Disk ?

Post Reply
svavaroe
Posts: 1
Joined: Tue Oct 30, 2012 9:10 am

Single 4K Sector Disk in d2 Ethernet Big Disk ?

Post by svavaroe » Tue Oct 30, 2012 9:27 am

Hi.

Has anyone been successful replacing the stock drives in d2 Ethernet Big disk
and install only one single disk ?

And also, is there a way to use 4K (advanced format) disk in those boxes ?

I'm using the Seagate Barracuda ST1000DM003

I have been trying to install a single 4K disk (1TB) without luck.
All the images located here are I think are for 512bytes sector drives.


Any help would be much appreciated.

Thanks allot people.

Best regards,
Svavar - Reykjavik - Iceland


fdisk -lu shows me

Code: Select all

Note: sector size is 4096 (not 512)

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
243 heads, 35 sectors/track, 28711 cylinders, total 244190646 sectors
Units = sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0005c0c3

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1             256      256255     1024000    5  Extended
/dev/sdb2          256256   244187054   975723196   83  Linux
/dev/sdb5             512       42523      168048   82  Linux swap / Solaris
/dev/sdb6           42780       51028       32996   83  Linux
/dev/sdb7           51285       59533       32996   83  Linux
/dev/sdb8           59790      102058      169076   83  Linux
/dev/sdb9          102315      255149      611340   83  Linux

Gashioru
Posts: 2
Joined: Fri Jul 24, 2015 7:19 am

Re: Single 4K Sector Disk in d2 Ethernet Big Disk ?

Post by Gashioru » Fri Jul 24, 2015 7:19 am

These content material from whence you came.

Post Reply