I bought empty Lacie 2Big. I prepared the disks according to the instructions and almost succeeded to set it working, but there is some error when booting. I suspect the reason is I am tring to use 320GB disks. Is it possible that the nas has minimum disk size?
#### Starting PatchManager using /dev/md1 and /dev/md2 ####
attempt to access beyond end of device
md1: rw=0, want=528120, limit=353152
JBD: IO error reading journal superblock
EXT3-fs: error loading journal.
mount: Mounting /dev/md1 on /var/original failed: Invalid argument
===BOOTFS: systemInitialize: Failed to mount /dev/md1
Just to mention that in the beginnig the nas was not starting at all because it was not recognising the disks. In fact the disks were not spinnig at all, due to missing 12V voltage. After some measurements I fount that there are two element that cause the problem. I wasn't able to find any information about them (the SMD code is N52Q), but they should be transistors that controll the power to the disks. For now I just removed the faulty elements and put metal wire to ensure 12V to the disks.