EdminiV2 Images with sshd included

Post Reply
first
Posts: 17
Joined: Sun Mar 28, 2010 4:17 am

EdminiV2 Images with sshd included

Post by first » Sun Jan 23, 2011 3:50 pm

The images were downloaded from this forum, but after following some tutorials I installed the ssdhd daemon. As that was almost a year ago so I dont remember the exact procedure and It was a little messy I choose to share this "ready to work" images. Some guy in this forum requested too that images so i decided to upload them.

These are the links to the images:

Code: Select all

sda6:
http://www.megaupload.com/?d=MHI87E16

sda7:
http://www.megaupload.com/?d=41HS24R6

sda8:
http://www.megaupload.com/?d=7ENKIVHT

The partition table is something like this:

Code: Select all

Disk /dev/sdb: 1000.2 GB, 1000203804160 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002dacc

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         125     1004031    5  Extended
/dev/sdb2             126      121601   975755970   83  Linux
/dev/sdb5               1          16      128457   83  Linux
/dev/sdb6              17          17        8001   83  Linux
/dev/sdb7              18          18        8001   83  Linux
/dev/sdb8              19          40      176683+  83  Linux
/dev/sdb9              41         124      674698+  83  Linux
/dev/sdb10            125         125        8001   83  Linux
Note: disk is in "sdb" because its the second disk connected in my linux virtual machine, you must change that to "sda" (if its the first disk) or any other letter.

- First, uncompress the files:

Code: Select all

$ bunzip2 *.bz2
- Next, restore the images to the partitions accordly:

Code: Select all

$ sudo dd if=sda6 of=/dev/sdb6
$ sudo dd if=sda7 of=/dev/sdb7
$ sudo dd if=sda8_sshd of=/dev/sdb8
- Next, format the rest of the partitions:

Code: Select all

$ sudo mkswap /dev/sdb5
$ sudo mke2fs -j /dev/sdb9
$ sudo mkfs.xfs /dev/sdb2
Note: If you dont have the "mkfs.xfs" command you need to install the xfsprogs package (on ubuntu will be "sudo apt-get install xfsprogs").

To login using ssh:

Code: Select all

$ ssh -l newroot edmini.local
The password of "newroot" is "admin". That user has UID and GID 0, so root privileges.

Post Reply