Lacie Nas Dead

Post Reply
Superdan
Posts: 1
Joined: Thu Jun 07, 2012 2:33 pm

Lacie Nas Dead

Post by Superdan » Thu Jun 07, 2012 2:40 pm

I have a Lacie 2big network that had failed hard drives.

I have replaced Both drives with 2x160gb hdd's

When I boot the Nas it starts, the light at the front flashes red continuosly and the LED's on the back flash blue. This happens for 10 seconds and then the NAS powers down.

Do i have to do something with the new drives in order to make the NAS boot?

Thankyou.

Mijzelf
Posts: 6207
Joined: Mon Jun 16, 2008 10:45 am

Re: Lacie Nas Dead

Post by Mijzelf » Thu Jun 07, 2012 2:46 pm

You'll have to install an operating system on the disks: Installing firmware on fresh disks

Post Reply