General NAS-Central Forums

Welcome to the NAS community
It is currently Mon Mar 19, 2018 11:05 am

All times are UTC

Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: 2Big Raid problems
PostPosted: Wed Nov 28, 2012 4:29 pm 

Joined: Wed Nov 28, 2012 9:39 am
Posts: 1
Hallo everybody
I need some help but please be patient as I'm not so experienced with nas :-)
I got a LaCie 2big Network in safe raid (raid 0)
The led of one of the hdd blinks red and the raid status says "clean, degraded,recovering" and the hdd status is exactly this
hard drive 0 active sync
hard drive 1 spare rebuilding

but the rebuilding of the raid never completes
It arrives more or less at half way than it begins again
I figured out one of the hdd was faulty and change it with a new one (same brand and features but not approved by Lacie) but it behaves the same

The firmware is not updated, is 2.0.7rc4 so I was wondering if this could be the problem
Assuming that it is, may I do the upgrade also while the nas is trying to recovering raid? or better remove the "faulty" disk and trying?
Please give me some advice :-)
Thanks in any case

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group