wget error

[PartisanEntity]

Has anyone else come across this error:

Code: Select all

NetworkSpace / # ipkg update
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/Packages
wget: write error: No space left on device
An error ocurred, return value: 1.
Collected errors:
ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp    -q -P /opt/ipkg-flDh9s http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/Packages'

I know I have enough free space because "df" displays this:

Code: Select all

NetworkSpace / # df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/sda2            975624832 397523056 578101776  41% /home
/dev/sdb1            961432072 390208776 522385296  43% /home/usbdisksdb1
/dev/sda9               664056    664028         0 100% /oldroot/snapshots

Any ideas?

[PartisanEntity]

Obviously I have done something since now when I try to browse the certain pages through the web admin pages, it spits out the html code and display an error at the top of the page (see attached image). Anyone know what I may have done?

[timtim]

Can you paste the output of mount in here?

[PartisanEntity]

I have a complete meltdown.

mount outputs nothing. neither does df or du.

the networkspace is not showing up in my networks tab in OSX.

and the LaCie Network Assistant cannot identify the firmware version anymore, it just says "N/A".

I still have ssh access.

What can I do? Is there any way to reset to factory settings?

Or can I reinstall the firmware manually through ssh?

Please help

[timtim]

Try:

rm -rf /opt/ipkg-flDh9s

[PartisanEntity]

I seem to have lost ssh access and the web admin pages will not load.

Is there any way to salvage this thing? I am willing to open this thing and connect the drives to my ubuntu machine. Anything I can do?

[timtim]

Try just restarting it (pull plug if necessary), then if that fails you can most likely do exactly that...

[PartisanEntity]

Tried restarting several times. But the box is unresponsive. Any tutorials on what I need to do once I attach the drives to my ubuntu machine?

[Mijzelf]

That's a bit hard, because it's not clear (to me) why your box stopped.

I suppose the functions of the different partitions won't be different from the EdMini V2. The function of these partitions are described here:

Concerning the partitions, AIUI and IIRC on the edmini V2:-

partition 1 (about 1 GB) is an extended partition containing 5 to 9
partition 2 (rest of disk) is user data
partition 5 (about 128 MB) is swap so backup is not necessary
partition 6 (about 8 MB) is raw uImage
partition 7 (about 8 MB) is initial ro rootfs
partition 8 (about 128 MB) overlays rootfs later
partition 9 (rest of extended partition: about 752 MB) contains personalisation and updates

First make a backup of 6 to 10 using dd:

Code: Select all

dd if=/dev/sdx6 of=~/sdx6

then you can always revert to the current situation.

Then have a look at sdx7 or sdx8 in /etc and below to files which are changed last 24 hours. (I hope the Network space has a proper clock). Try to find which changes are caused by you. Maybe you can loopmount the EdMini v2 partitions as reference.

You can remove or rename all hacking stuff you added to sdx2, which is the datapartition.

For the moment I have no more ideas.

[Pigi87]

Has anyone else come across this error:

Code: Select all

NetworkSpace / # ipkg update
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/Packages
wget: write error: No space left on device
An error ocurred, return value: 1.
Collected errors:
ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp    -q -P /opt/ipkg-flDh9s http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/Packages'

I know I have enough free space because "df" displays this:

Code: Select all

NetworkSpace / # df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/sda2            975624832 397523056 578101776  41% /home
/dev/sdb1            961432072 390208776 522385296  43% /home/usbdisksdb1
/dev/sda9               664056    664028         0 100% /oldroot/snapshots

Any ideas?

basically you have /dev/sda9 full, so wget can't write any more on the root filesystem, nor in any directory other than /home. You must consider that the linux by factory use unionfs, wich union /dev/sda7, /dev/sda8 e /dev/sda9 in a unique root filesystem and save the changes of files only on /dev/sda9.