General NAS-Central Forums

Welcome to the NAS community
It is currently Fri Dec 15, 2017 6:32 am

All times are UTC




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: It does not boot
PostPosted: Wed May 11, 2011 6:17 pm 
Offline

Joined: Wed May 11, 2011 6:03 pm
Posts: 2
Hi,
please be lenient with my english.

I tried many things. I have a U-Boot log .... Who can tell me where to find the kernel logging etc ?

The drive itself seems to be fine. I have had connected the drive to usb and could access all "normal" partitions.

I cant ping the device after I hit the ENTER key to boot ... :(
The hardware off switch does not work too.
Code:
Marvell>> version
version

U-Boot 1.1.4 (Feb  8 2008 - 09:08:25) Lacie version: 2.4.2-TINY

Code:
Marvell>> ide reset; disk ${kernel_addr} 0:6; bootm ${kernel_addr};
ide reset; disk ${kernel_addr} 0:6; bootm ${kernel_addr};

Reset IDE:
Marvell Serial ATA Adapter
Integrated Sata device found
  Device 0: OK
Model: Hitachi HDP725050GLA360                  Firm: GM4OA52A Ser#:       GEA530RF15069A
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)


Loading from IDE device 0, partition 6: Name: hda6
  Type: U-Boot
   Image Name:   Linux-2.6.12.6-arm1
   Created:      2008-08-14  14:36:32 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1278524 Bytes =  1.2 MB
   Load Address: 00008000
   Entry Point:  00008000
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.12.6-arm1
   Created:      2008-08-14  14:36:32 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1278524 Bytes =  1.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...


Does someone have an idea?

Any help would be great.

Sven


Top
 Profile  
 
 Post subject: Re: It does not boot
PostPosted: Thu May 12, 2011 7:07 pm 
Offline

Joined: Wed May 11, 2011 6:03 pm
Posts: 2
Hi,

I downloaded all the files and copied them as described here

http://forum.nas-central.org/viewtopic.php?f=221&t=1186&start=30

now its working again.

Well, now I have to hack it again ;)

bye
Sven


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group