NSA210 HDD on USB - how to read xfs

Oxnas 810 based
Post Reply
lorakk78
Posts: 2
Joined: Wed Oct 09, 2013 6:07 pm

NSA210 HDD on USB - how to read xfs

Post by lorakk78 » Wed Oct 09, 2013 6:22 pm

Hi,
Can you help me access my old hdd, I used in my NSA210. I mounted larger disk and conected old one via sata-usb cable. I would like to copy my data to new disk but partition xfs is not mounted (only ext2). I have installed FFP 0.7 and ssh connection.

Mijzelf
Posts: 6198
Joined: Mon Jun 16, 2008 10:45 am

Re: NSA210 HDD on USB - how to read xfs

Post by Mijzelf » Wed Oct 09, 2013 6:26 pm

Find the partition by

Code: Select all

cat /proc/partitions
Assemble the raid array, assuming the data partition is sdb2

Code: Select all

mdadm --assemble /dev/md2 /dev/sdb2 --run
Create mountpoint and mount

Code: Select all

mkdir /tmp/mp
mount /dev/md2 /tmp/mp

lorakk78
Posts: 2
Joined: Wed Oct 09, 2013 6:07 pm

Re: NSA210 HDD on USB - how to read xfs

Post by lorakk78 » Wed Oct 09, 2013 7:19 pm

Thank you, VERY MUCH :)

Post Reply