Wrong firmware in NSA210

Oxnas 810 based
Post Reply
koszyk
Posts: 1
Joined: Mon Mar 31, 2014 2:15 pm

Wrong firmware in NSA210

Post by koszyk » Mon Mar 31, 2014 3:02 pm

Hi,
I have got a NSA210 with firmware from NSA310 (ver.4.51) :( U-boot works. I load from TFTP server, uImage to ram, but I do not know where save it in flash? Will someone please help me?
P.S. Please excuse my poor English :oops:

Mijzelf
Posts: 6197
Joined: Mon Jun 16, 2008 10:45 am

Re: Wrong firmware in NSA210

Post by Mijzelf » Mon Mar 31, 2014 5:46 pm

koszyk wrote:I have got a NSA210 with firmware from NSA310 (ver.4.51)
I won't ask :mrgreen:
uImage to ram, but I do not know where save it in flash?
From the Wiki:

Code: Select all

7 cmdlinepart partitions found on MTD device physmap-flash.0
Creating 7 MTD partitions on "physmap-flash.0":
0x00000000-0x00020000 : "uboot"
mtd: Giving out device 0 to uboot
0x00020000-0x001e0000 : "kernel"
mtd: Giving out device 1 to kernel
0x001e0000-0x00380000 : "initrd"
mtd: Giving out device 2 to initrd
0x00380000-0x003f0000 : "etc"
mtd: Giving out device 3 to etc
0x003f0000-0x003fc000 : "empty"
mtd: Giving out device 4 to empty
0x003fc000-0x003fe000 : "env1"
mtd: Giving out device 5 to env1
0x003fe000-0x00400000 : "env2"
mtd: Giving out device 6 to env2
If you didn't trash your u-boot environment, it should be visible there too:
cmdline wrote:mtdparts=physmap-flash.0:128k(uboot),1792k(kernel),1664k(initrd),448k(etc),48k(empty),8k(env1),8k(env2)

Post Reply