General NAS-Central Forums

Welcome to the NAS community
It is currently Mon May 29, 2017 11:03 pm

All times are UTC




Post new topic Reply to topic  [ 18 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: FW Problem
PostPosted: Tue Sep 23, 2014 6:22 pm 
Offline

Joined: Wed Sep 17, 2014 6:40 am
Posts: 10
Manual method works well ... after that, i tried disable firewall and install NAS with zyxel utility and it works too.

but there is last problem :( ... i'm unable to create logical volume and upgrade FW (to 441AFD0C0)

bootlog
Code:

1.00 U-Boot 1.1.2 (Apr 10 2009 - 16:43:58)

U-Boot code: 48D00000 -> 48D17270  BSS: -> 48D1AF20
RAM Configuration:
        Bank #0: 48000000 128 MB
SRAM Configuration:
        128KB at 0x58000000
Flash:  4 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
## Booting image at 41020000 ...
   Image Name:   Linux-2.6.24.4
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1771216 Bytes =  1.7 MB
   Load Address: 48008000
   Entry Point:  48008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux.............................................................................................................. done, booting the kernel.
Linux version 2.6.24.4 (root@Neo) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #1 Thu Jul 19 16:51:18 CST 2012
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: Oxsemi NAS
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 rw init=/sbin/init initrd=0x4a000000,4M elevator=cfq mtdparts=physmap-flash.0:128k(uboot),1792k(kernel),1664k(initrd),448k(etc),48k(empty),8k(env1),8k(env2) mem=128M poweroutage=yes
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 122240KB available (3188K code, 198K data, 116K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
Number of DMA channels = 5, version = 4
Allocating 891 SRAM generic DMA descriptors
Chip Id: die-id 0x0b34bab1e5c0 read back 0xbeefcafe
PCI: bus0: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4096K
Probing for Synopsis GMAC, unit 0
eth0: PHY is ICPlus 1001
phy init done
eth0: GMAC ver = 51, vendor ver = 17 at 0xe8000000, IRQ 8
eth0: Found PHY at address 1, type 0x02430d90 -> 10/100/1000
eth0: Ethernet addr: 00:30:e0:00:00:00
Init phy sucessfully
thermAndFan: initializing - ox810
Init led blk
Enable Interrupt
Copy button
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.9)
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
â–’serial8250: ttyS0 at MMIO 0x44900000 (irq = 29) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ox810sata: OX810 sata core.
scsi0 : oxnassata
ata1: SATA max UDMA/133 irq 18
ata_eh_reset(2207):Sleep 1 sec before any error happens
Copy button release
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata_dev_read_id(2037): Give 100ms while getting HW ID
ata1.00: HPA detected: current 781420655, native 781422768
ata1.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
ata1.00: 781420655 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata_dev_read_id(2037): Give 100ms while getting HW ID
ata1.00: configured for UDMA/133
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb t4
ata1: soft resetting link
ata_eh_reset(2207):Sleep 1 sec before any error happens
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata_dev_read_id(2037): Give 100ms while getting HW ID
ata_dev_read_id(2037): Give 100ms while getting HW ID
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access     WDC      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 781420655 512-byte hardware sectors (400087 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ox810sata: OX810 sata core.
scsi1 : oxnassata
ata2: SATA max UDMA/133 irq 18
ata_eh_reset(2207):Sleep 1 sec before any error happens
ata2: SATA link down (SStatus 0 SControl 300)
physmap platform flash device: 00400000 at 41000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
7 cmdlinepart partitions found on MTD device physmap-flash.0
Creating 7 MTD partitions on "physmap-flash.0":
0x00000000-0x00020000 : "uboot"
mtd: Giving out device 0 to uboot
0x00020000-0x001e0000 : "kernel"
mtd: Giving out device 1 to kernel
0x001e0000-0x00380000 : "initrd"
mtd: Giving out device 2 to initrd
0x00380000-0x003f0000 : "etc"
mtd: Giving out device 3 to etc
0x003f0000-0x003fc000 : "empty"
mtd: Giving out device 4 to empty
0x003fc000-0x003fe000 : "env1"
mtd: Giving out device 5 to env1
0x003fe000-0x00400000 : "env2"
mtd: Giving out device 6 to env2
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver@e7000000 Device ID register 42fa05
oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
oxnas-ehci oxnas-ehci.0: irq 7, io mem 0x00000000
oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
usb 1-1: new high speed USB device using oxnas-ehci and address 2
In hub_port_init, and number is 0, retry 0, port 1 .....
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
pcf8563 0-0051: chip found, driver version 0.4.2
pcf8563 0-0051: rtc core: registered pcf8563 as rtc0
OXNAS bit-bash I2C driver initialisation OK
md: linear personality registered for level -1
md: raid1 personality registered for level 1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc)
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 116K
MTD_open
MTD_ioctl
MTD_read
MTD_close
MTD_open
MTD_ioctl
MTD_read
MTD_close
Mounting file systems...
MTD_open
MTD_ioctl
MTD_read
MTD_close
MTD_open
MTD_ioctl
MTD_read
MTD_close
egiga0: PHY is ICPlus 1001
Resetting GMAC
GMAC reset complete
ifconfig: bad address 'add'
Starting udhcpc ...
udhcpc (v1.17.2) started
Sending discover...
sda
MTD_open
MTD_ioctl
MTD_read
MTD_close
MTD_open
MTD_ioctl
MTD_read
MTD_close
Revision on flash: 35922
Revision of HD:
 >>> System disk is found! <<<
MD5_FLASH=a2a37731b442de7cb7525bba6ff8a2d6
egiga0: PHY is ICPlus 1001
egiga0: link down
egiga0: link up, 1000Mbps, full-duplex, using pause, lpa 0xC5E1
Sending discover...
Sending select for 192.168.88.110...
Lease of 192.168.88.110 obtained, lease time 259200
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.88.1
MD5_HD=a2a37731b442de7cb7525bba6ff8a2d6
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
2048 inodes, 8192 blocks
0 blocks (0%) reserved for the super user
First data block=1
Maximum filesystem blocks=262144
1 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
cp: can't stat '/ram_bin/home/*': No such file or directory
cp: can't stat '/ram_bin/mnt/*': No such file or directory
Creating device nodes...done.
MTD_open
MTD_ioctl
MTD_read
MTD_close
MTD_open
MTD_ioctl
MTD_read
MTD_close
/etc/zyxel/conf exist..
SGI XFS with large block numbers, no debug enabled
SGI XFS Quota Management subsystem
NTFS driver 2.1.29 [Flags: R/O MODULE].
tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
Tuxera NTFS driver 3012.1.20 [Flags: R/W MODULE].
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
modprobe: can't open 'modules.dep': No such file or directory
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sda
checking sda
Trying to mount /dev/sda1
mount: /dev/sda1 already mounted or /mnt/parnerkey busy
mount: according to mtab, /dev/sda1 is mounted on /zyxel/mnt/sysdisk
Fail to mount /dev/sda1
Press ENTER to continue...
Starting zylogd...
 zylog starts.
Starting uamd...
Starting ZySH daemon and client...
Start NSA-220 system daemon....
 Start ZySH daemon
zyshd: version 2.0.0 (build: 21:41:52 Jul 19 2012)
% zylog init start
cat: can't open '/var/run/syslog-ng.pid': No such file or directory
Try to KILL SIGHUP to syslog-ng: pid=0
syslog-ng not running, start /usr/sbin/syslog-ng
Sep 23 20:09:36 (none) syslog-ng[1591]: syslog-ng starting up; version='2.0.10'
zyio_open_config success. (/etc/__system_default.xml, 0)
zyio_open_config success. (/etc/zyxel/conf/__system_default_device_ha.xml, 0)
/usr/sbin/zic -d /etc /var/zyxel/myzone_rule
/bin/ln -s -f /etc/MyZone /etc/localtime
/bin/hostname NSA210
Usage: umount [-hV]
       umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
       umount [-f] [-r] [-n] [-v] special | node...
Usage: umount [-hV]
       umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
       umount [-f] [-r] [-n] [-v] special | node...
find: /home/shares: No such file or directory
BusyBox v1.17.2 (2012-07-19 21:37:59 CST) multi-call binary.

Usage: rmdir [OPTIONS] DIRECTORY...

Init SMB DB access...
rm: can't remove '/var/log/samba/smb.db': No such file or directory
Assemble volume....
[1633] server write-only FIFO is opened (fd=6)
[1633] server read-only FIFO is opened (fd=7)
[1633] server error read-only FIFO is opened (fd=8)
argc = 1,  func = 277
POLLHUP on 7
  pid = 1633
[1633] is disconnected
 Startup config
[1652] server write-only FIFO is opened (fd=6)
[1652] server read-only FIFO is opened (fd=7)
[1652] server error read-only FIFO is opened (fd=8)
argc = 1,  func = 14
argc = 1,  func = 17
argc = 2,  func = 104
argid[1]: 1076; argv[1]: ge1
argc = 5,  func = 107
argid[1]: 1076; argv[1]: ge1
argid[2]: 313; argv[2]: ip
argid[3]: 434; argv[3]: address
argid[4]: 538; argv[4]: dhcp
argc = 3,  func = 105
argid[1]: 1076; argv[1]: ge1
argid[2]: 350; argv[2]: exit
argc = 2,  func = 440
argid[1]: 1069; argv[1]: 192.168.88.1
argc = 4,  func = 442
argid[1]: 875; argv[1]: fetch
argid[2]: 628; argv[2]: auto
argid[3]: 1076; argv[3]: ge1
/bin/rm -f /var/zyxel/zysh/egiga0.metric
/bin/ip route del default via 0.0.0.0 dev egiga0
ip: RTNETLINK answers: No such process
Sep 23 20:09:45 (none) dhcpcd[1679]: dhcpT1value is 129600 sec
Sep 23 20:09:45 (none) dhcpcd[1679]: dhcpT2value is 226800 sec
[1657] server write-only FIFO is opened (fd=9)
[1657] server read-only FIFO is opened (fd=10)
[1657] server error read-only FIFO is opened (fd=11)
[1693] server write-only FIFO is opened (fd=12)
[1693] server read-only FIFO is opened (fd=13)
[1693] server error read-only FIFO is opened (fd=14)
argc = 2,  func = 124
argid[1]: 1078; argv[1]: ppp0
argc = 1,  func = 441
POLLHUP on 10
  pid = 1657
[1657] is disconnected
argc = 3,  func = 443
argid[1]: 1076; argv[1]: ge1
argid[2]: 1069; argv[2]: 192.168.88.1
POLLHUP on 13
  pid = 1693
[1693] is disconnected
argc = 3,  func = 127
argid[1]: 1078; argv[1]: ppp0
argid[2]: 429; argv[2]: shutdown
argc = 3,  func = 125
argid[1]: 1078; argv[1]: ppp0
argid[2]: 350; argv[2]: exit
argc = 7,  func = 77
argid[1]: 267; argv[1]: mail
argid[2]: 1392; argv[2]: 1
argid[3]: 435; argv[3]: category
argid[4]: 375; argv[4]: all
argid[5]: 461; argv[5]: level
argid[6]: 478; argv[6]: alert
mail server '1' log_category(all) is:alert
[1698] server write-only FIFO is opened (fd=9)
[1698] server read-only FIFO is opened (fd=10)
[1698] server error read-only FIFO is opened (fd=11)
argc = 7,  func = 77
argid[1]: 267; argv[1]: mail
argid[2]: 1392; argv[2]: 1
argid[3]: 435; argv[3]: category
argid[4]: 375; argv[4]: all
argid[5]: 461; argv[5]: level
argid[6]: 375; argv[6]: all
mail server '1' log_category(all) is:all
argc = 1,  func = 444
POLLHUP on 10
  pid = 1698
[1698] is disconnected
argc = 2,  func = 68
argid[1]: 1068; argv[1]: time.stdtime.gov.tw
argc = 2,  func = 60
argid[1]: 1119; argv[1]: +0100
/usr/sbin/zic -d /etc /var/zyxel/myzone_rule
/bin/ln -s -f /etc/MyZone /etc/localtime
argc = 1,  func = 72
/usr/sbin/ntpdate_agent time.stdtime.gov.tw
argc = 4,  func = 343
argid[1]: 1212; argv[1]: "CET"
argid[2]: 593; argv[2]: in
argid[3]: 1213; argv[3]: "Budapest,Belgrade,Bratislava,Ljubljana,Prague"
argc = 1,  func = 38
killall: pure-ftpd: no process killed
/usr/sbin/dst.sh: line 177: can't create /i-data/.zyxel/storage.txt: nonexistent directory
/usr/sbin/dst.sh: line 177: can't create /i-data/.zyxel/storage.txt: nonexistent directory
/usr/sbin/dst.sh: line 177: can't create /i-data/.zyxel/storage.txt: nonexistent directory
/usr/sbin/dst.sh: line 177: can't create /i-data/.zyxel/storage.txt: nonexistent directory
/usr/sbin/dst.sh: line 177: can't create /i-data/.zyxel/storage.txt: nonexistent directory
Usage: umount [-hV]
       umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
       umount [-f] [-r] [-n] [-v] special | node...
Sep 23 18:10:29 (none) ntpdate[1712]: step time server 118.163.81.61 offset -7158.963803 sec
Usage: umount [-hV]
       umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
       umount [-f] [-r] [-n] [-v] special | node...
BusyBox v1.17.2 (2012-07-19 21:37:59 CST) multi-call binary.

Usage: rmdir [OPTIONS] DIRECTORY...

argc = 2,  func = 192
argid[1]: 1129; argv[1]: "admin"
argc = 5,  func = 193
argid[1]: 1129; argv[1]: "admin"
argid[2]: 1403; argv[2]: 501
argid[3]: 363; argv[3]: password
argid[4]: 1152; argv[4]: F0D412BD764FFE81AAD3B435B51404EE:209C6174DA490CAEB422F3FA5A7AE634
enter smb_db_update_user
argc = 5,  func = 193
argid[1]: 1129; argv[1]: "admin"
argid[2]: 1403; argv[2]: 501
argid[3]: 633; argv[3]: type
argid[4]: 634; argv[4]: admin
enter smb_db_update_user
argc = 5,  func = 194
argid[1]: 1129; argv[1]: "admin"
argid[2]: 1403; argv[2]: 501
argid[3]: 638; argv[3]: shpass
argid[4]: 1155; argv[4]:  $1$$CoERg7ynjYLsj2j4glJ34.
shpass : $1$$CoERg7ynjYLsj2j4glJ34.
argc = 4,  func = 189
argid[1]: 1129; argv[1]: "admin"
argid[2]: 1403; argv[2]: 501
argid[3]: 350; argv[3]: exit
argc = 6,  func = 174
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "public"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/public"
folder is not under mount point.
argc = 7,  func = 163
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "public"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/public"
argid[6]: 350; argv[6]: exit
share path /i-data/md0/public not existing.
share path /i-data/md0/video not existing.
share path /i-data/md0/photo not existing.
share path /i-data/md0/music not existing.
share path /i-data/md0/admin not existing.
RegenSmbConfigFile:2185 Close file ok
argc = 6,  func = 174
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "video"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/video"
folder is not under mount point.
argc = 7,  func = 175
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "video"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/video"
argid[6]: 612; argv[6]: media-server
argc = 7,  func = 163
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "video"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/video"
argid[6]: 350; argv[6]: exit
share path /i-data/md0/public not existing.
share path /i-data/md0/video not existing.
share path /i-data/md0/photo not existing.
share path /i-data/md0/music not existing.
share path /i-data/md0/admin not existing.
RegenSmbConfigFile:2185 Close file ok
argc = 6,  func = 174
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "photo"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/photo"
folder is not under mount point.
argc = 7,  func = 175
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "photo"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/photo"
argid[6]: 612; argv[6]: media-server
argc = 7,  func = 163
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "photo"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/photo"
argid[6]: 350; argv[6]: exit
share path /i-data/md0/public not existing.
share path /i-data/md0/video not existing.
share path /i-data/md0/photo not existing.
share path /i-data/md0/music not existing.
share path /i-data/md0/admin not existing.
RegenSmbConfigFile:2185 Close file ok
argc = 6,  func = 174
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "music"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/music"
folder is not under mount point.
argc = 7,  func = 175
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "music"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/music"
argid[6]: 612; argv[6]: media-server
argc = 7,  func = 163
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "music"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/music"
argid[6]: 350; argv[6]: exit
share path /i-data/md0/public not existing.
share path /i-data/md0/video not existing.
share path /i-data/md0/photo not existing.
share path /i-data/md0/music not existing.
share path /i-data/md0/admin not existing.
RegenSmbConfigFile:2185 Close file ok
argc = 6,  func = 174
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "admin"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/admin"
folder is not under mount point.
argc = 7,  func = 163
argid[1]: 456; argv[1]: share
argid[2]: 626; argv[2]: save
argid[3]: 1157; argv[3]: "admin"
argid[4]: 395; argv[4]: path
argid[5]: 1159; argv[5]: "/i-data/md0/admin"
argid[6]: 350; argv[6]: exit
share path /i-data/md0/public not existing.
share path /i-data/md0/video not existing.
share path /i-data/md0/photo not existing.
share path /i-data/md0/music not existing.
share path /i-data/md0/admin not existing.
RegenSmbConfigFile:2185 Close file ok
argc = 4,  func = 410
argid[1]: 1238; argv[1]: yes
argid[2]: 1239; argv[2]: yes
argid[3]: 1240; argv[3]: yes
argc = 2,  func = 18
argid[1]: 350; argv[1]: exit
argc = 1,  func = 20
POLLHUP on 7
  pid = 1652
[1652] is disconnected
configure terminal ip smb internal disable "/i-data/md0"
[1856] server write-only FIFO is opened (fd=6)
[1856] server read-only FIFO is opened (fd=7)
[1856] server error read-only FIFO is opened (fd=8)
argc = 4,  func = 181
argid[1]: 630; argv[1]: internal
argid[2]: 303; argv[2]: disable
argid[3]: 1171; argv[3]: "/i-data/md0"
share path /i-data/md0/public not existing.
share path /i-data/md0/video not existing.
share path /i-data/md0/photo not existing.
share path /i-data/md0/music not existing.
share path /i-data/md0/admin not existing.
RegenSmbConfigFile:2185 Close file ok
no such autosata.
Error happens when deleting autosata.
[1856] is disconnected
configure terminal ip smb internal disable "/i-data/md1"
[1859] server write-only FIFO is opened (fd=6)
[1859] server read-only FIFO is opened (fd=7)
[1859] server error read-only FIFO is opened (fd=8)
argc = 4,  func = 181
argid[1]: 630; argv[1]: internal
argid[2]: 303; argv[2]: disable
argid[3]: 1171; argv[3]: "/i-data/md1"
share path /i-data/md0/public not existing.
share path /i-data/md0/video not existing.
share path /i-data/md0/photo not existing.
share path /i-data/md0/music not existing.
share path /i-data/md0/admin not existing.
RegenSmbConfigFile:2185 Close file ok
no such autosata.
Error happens when deleting autosata.
[1859] is disconnected
no volume exist...
Starting smbd...
Starting nmbd...
Starting NSU Agent...
Starting copy auto daylight saving tzfile to /i-data/md0/.zyxel/ ...
cp -a /usr/local/zoneinfo /i-data/md0/.zyxel/
cp: can't create directory '/i-data/md0/.zyxel/': No such file or directory
storage_gen_swap.sh:/zyxel/mnt/sysdisk/swap_ul6545p exists
GMT offset=0s
setting system time zone to tz_minuteswest=0
/sbin/adjtimex: unrecognized option '--tick'
BusyBox v1.17.2 (2012-07-19 21:37:59 CST) multi-call binary.

Usage: adjtimex [-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]

mknod: /dev/btncpy: File exists
Starting diagnosed...
setLED COPY OFF
led_state_map_addr = 10
Starting app_wd...
[2167] server write-only FIFO is opened (fd=6)
[2167] server read-only FIFO is opened (fd=7)
[2167] server error read-only FIFO is opened (fd=8)
argc = 2,  func = 348
argid[1]: 1214; argv[1]: former
POLLHUP on 7
  pid = 2167
[2167] is disconnected
schedule_controller is already running now.
Starting "/etc/init.d/zypkg_controller.sh".
Starting to set up zy-pkgs environment ...
-> No volume exists now. zy-pkgs will not work.
Starting "/etc/init.d/zypkg_controller.sh".
Starting all zypkgs via "/etc/init.d/zypkg_controller.sh" ...
- starting package "PHP-MySQL-phpMyAdmin" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/PHP-MySQL-phpMyAdmin" is not existed or not excutable
- starting package "gallery" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/gallery" is not existed or not excutable
- starting package "WordPress" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/WordPress" is not existed or not excutable
- starting package "SqueezeCenter" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/SqueezeCenter" is not existed or not excutable
- starting package "eMule" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/eMule" is not existed or not excutable
- starting package "DyDNS" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/DyDNS" is not existed or not excutable
- starting package "SMART" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/SMART" is not existed or not excutable
- starting package "BackupPlanner" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/BackupPlanner" is not existed or not excutable
- starting package "NFS" ...
---> Error: start-up program "/usr/local/zy-pkgs/etc/init.d/NFS" is not existed or not excutable
/etc/init.d/zypkg_controller.sh: line 491: can't open /i-data/md0/admin/zy-pkgs/USRPKG_DEPS_START: no such file
Finish "/etc/init.d/zypkg_controller.sh".
No BackupPlanner package inside this firmware.
mkdir: can't create directory '/i-data/.zyxel/web_cache': No such file or directory
mount: special device /i-data/.zyxel/web_cache does not exist
chmod: /i-data/.zyxel/zyxelFrameworkLog: No such file or directory
chmod: /usr/local/apache/web_framework/data/cache: Read-only file system
chmod: /usr/local/apache/web_framework/data/cache: Read-only file system
Starting Web Server...
Sep 23 18:10:51 (none) httpd[2310]: [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
Sep 23 18:10:51 (none) httpd[2310]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
Sep 23 18:10:51 (none) httpd[2310]: [warn] RSA server certificate CommonName (CN) `NSA210' does NOT match server name!?
Sep 23 18:10:51 (none) httpd[2310]: [error] mod_auth_zyxel: initialized.
led_state_map_addr = 46
 core_checksum : CFF3
 fwversion : V4.40(AFD.1)
 image_checksum : a2a37731b442de7cb7525bba6ff8a2d6  /zyxel/mnt/sysdisk/sysdisk.img
 initrd_checksum : B81D
 modelid : D401
 revision : 35922
 romfile_checksum : BF8D
 zld_checksum : 4ECA

Please press Enter to activate this console.


BusyBox v1.17.2 (2012-07-19 21:37:59 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

Sep 23 18:10:54 (none) init: starting pid 2346, tty '': '-/bin/sh'
/ #


if i try create logical volume, console print this

Code:
 [2784] server write-only FIFO is opened (fd=6)
[2784] server read-only FIFO is opened (fd=7)
[2784] server error read-only FIFO is opened (fd=8)
argc = 1,  func = 14
argc = 1,  func = 260
mdadm: cannot open /dev/sda2: No such device or address
mdadm: cannot open /dev/sda2: No such device or address
argc = 1,  func = 257
argc = 1,  func = 261
argc = 1,  func = 20
POLLHUP on 7
  pid = 2784
[2784] is disconnected
[2819] server write-only FIFO is opened (fd=6)
[2819] server read-only FIFO is opened (fd=7)
[2819] server error read-only FIFO is opened (fd=8)
argc = 1,  func = 14
argc = 1,  func = 291
argc = 1,  func = 297
argc = 1,  func = 20
POLLHUP on 7
  pid = 2819
[2819] is disconnected
[2853] server write-only FIFO is opened (fd=6)
[2853] server read-only FIFO is opened (fd=7)
[2853] server error read-only FIFO is opened (fd=8)
argc = 1,  func = 14
argc = 1,  func = 262
argc = 1,  func = 257
argc = 1,  func = 260
mdadm: cannot open /dev/sda2: No such device or address
mdadm: cannot open /dev/sda2: No such device or address
argc = 1,  func = 20
POLLHUP on 7
  pid = 2853
[2853] is disconnected
[2901] server write-only FIFO is opened (fd=6)
[2901] server read-only FIFO is opened (fd=7)
[2901] server error read-only FIFO is opened (fd=8)
argc = 1,  func = 14
argc = 5,  func = 284
argid[1]: 1182; argv[1]: "volume01"
argid[2]: 1198; argv[2]: jbod
argid[3]: 1192; argv[3]: default
argid[4]: 1187; argv[4]: disk1
argc = 1,  func = 263
swapoff: /dev/sda1: Invalid argument
argc = 1,  func = 20
POLLHUP on 7
  pid = 2901
[2901] is disconnected
[2970] server write-only FIFO is opened (fd=6)
[2970] server read-only FIFO is opened (fd=7)
[2970] server error read-only FIFO is opened (fd=8)
argc = 1,  func = 14
argc = 1,  func = 263
argc = 1,  func = 20
POLLHUP on 7
  pid = 2970
[2970] is disconnected


when i try upgrade fw, console print this:
Code:
/ # Sep 23 18:15:30 (none) httpd[2358]: [error] [client 192.168.88.100] Premature end of script headers: file_upload-cgic2, referer: http://192.168.88.110/zyxel/admin/



this is actual mountpoints
Code:
/ # mount
rootfs on / type rootfs (rw)
/dev/root on / type ext2 (rw)
/proc on /proc type proc (rw)
none on /proc/bus/usb type usbfs (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw)
/dev/mtdblock4 on /zyxel/mnt/info type jffs2 (ro)
/dev/sda1 on /zyxel/mnt/sysdisk type ext2 (ro)
/dev/loop0 on /ram_bin type ext2 (ro)
/dev/loop0 on /usr type ext2 (ro)
/dev/loop0 on /sbin type ext2 (ro)
/dev/loop0 on /bin type ext2 (ro)
/dev/loop0 on /lib type ext2 (ro)
/dev/ram3 on /tmp type ext2 (rw)
/dev/ram3 on /var type ext2 (rw)
/dev/ram3 on /home type ext2 (rw)
/dev/ram3 on /mnt type ext2 (rw)
/dev/ram3 on /etc type ext2 (rw)
/dev/ram3 on /dev type ext2 (rw)
/dev/ram3 on /usr/local/etc type ext2 (rw)
/dev/ram3 on /usr/local/var type ext2 (rw)
/dev/ram3 on /usr/local/dmsf type ext2 (rw)
/dev/mtdblock3 on /etc/zyxel type jffs2 (rw)
/dev/ram3 on /i-data type ext2 (rw)
/dev/ram3 on /e-data type ext2 (rw)
/dev/mtdblock3 on /usr/local/apache/web_framework/data/config type jffs2 (rw)
/ #


Top
 Profile  
 
 Post subject: Re: FW Problem
PostPosted: Wed Sep 24, 2014 8:34 am 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 5995
All errors in your bootlog are as far as I can see caused by the lack of a data volume.

Quote:
mdadm: cannot open /dev/sda2: No such device or address
Apparently the 'volume creator' assumes the partition is already there. But it isn't. So use fdisk to create a 2nd (primary) partition, which spans the rest of the disk, and retry to create a volume.

Quote:
when i try upgrade fw, console print this:
Is the box supposed to be upgradable without data volume? I can imagine it needs it to store the new firmware temporary.


Top
 Profile  
 
 Post subject: Re: FW Problem
PostPosted: Wed Sep 24, 2014 10:34 am 
Offline

Joined: Wed Sep 17, 2014 6:40 am
Posts: 10
YES :)

you're right. Problem was, that i manually create partition across whole disk before installation. When I deleted all partition from disk and runned installation again, all finished well.


Thank you for this big help :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page Previous  1, 2

All times are UTC


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group