LED control

Oxnas 810 based
Post Reply
chrigu
Posts: 6
Joined: Wed Jun 16, 2010 1:49 pm

LED control

Post by chrigu » Mon Aug 02, 2010 9:12 am

Hi

how is it possible to control the state of the built-in LEDs by software?
I want to use my NSA210 with funplug to switch other devices. I will try to connect the LEDs to relays or optocoupplers.

greetings
Chrigu

Mijzelf
Posts: 6207
Joined: Mon Jun 16, 2008 10:45 am

Re: LED control

Post by Mijzelf » Mon Aug 02, 2010 10:28 am

Try /sbin/setLED --help

chrigu
Posts: 6
Joined: Wed Jun 16, 2010 1:49 pm

Re: LED control

Post by chrigu » Mon Aug 02, 2010 7:46 pm

works pefect!
TNX

Zenit
Posts: 1
Joined: Tue Feb 01, 2011 7:34 pm

Re: LED control

Post by Zenit » Tue Feb 01, 2011 8:57 pm

Hello.
Advice please, beeps when you turn off NSA210, or reset, as you can then programmatically configure?
With LED figured out.
I would add to the script sounds, say after download torrents.
There are files in the firmware, which is responsible for sound signals, or they just mehpnicheskogo clicking?

User avatar
oscyp
Posts: 9
Joined: Fri Aug 17, 2012 7:30 pm

Re: LED control

Post by oscyp » Sat Sep 01, 2012 9:37 pm

/sbin/buzzerc -h

Code: Select all

Usage: buzzerc [-h] [-s] [-k] [-t SEC]

  -h         Help menu.
  -t         Lasting time in seconds. The range is 1 to 30 seconds.
             The value over 30 sec is treated as FOREVER.
  -s         Stop the buzzing sound.
  -k         Kill the buzzer daemon.

Post Reply