NSA-212/Medion Life P89626/P89630: Guide to install SABnzbd

Oxnas 810 based
Post Reply
thowi
Posts: 3
Joined: Tue May 22, 2012 6:33 pm

NSA-212/Medion Life P89626/P89630: Guide to install SABnzbd

Post by thowi » Tue May 22, 2012 9:23 pm

Just created a guide to install SABnzbd on the NSA-212.
http://zyxel.nas-central.org/wiki/SABnzdb

Works pretty well so far!
If a tad slow (only 2MB/sec downloads, CPU at 100%)...

Known issue: The startup script is a bit hacky.

Feel free to try it out!

Mijzelf
Posts: 6198
Joined: Mon Jun 16, 2008 10:45 am

Re: NSA-212/Medion Life P89626/P89630: Guide to install SABn

Post by Mijzelf » Wed May 23, 2012 2:01 pm

Hey, nice!

Are you sure FFP 0.6 is needed? When Grish started his work 0.7 was not out yet, I think. Python 2.7.2 is available for FFP 0.7/arm.

thowi
Posts: 3
Joined: Tue May 22, 2012 6:33 pm

Re: NSA-212/Medion Life P89626/P89630: Guide to install SABn

Post by thowi » Wed May 23, 2012 2:10 pm

Oh, awesome!

I only checked http://ffp.inreto.de/ffp/0.7/arm/packages/, and there it was Python 3.2.2.

I will update the guide to use FFP 0.7.

Thanks a lot!

Mijzelf
Posts: 6198
Joined: Mon Jun 16, 2008 10:45 am

Re: NSA-212/Medion Life P89626/P89630: Guide to install SABn

Post by Mijzelf » Wed May 23, 2012 2:26 pm

Have a look here, and then use slacker to install the packages.

thowi
Posts: 3
Joined: Tue May 22, 2012 6:33 pm

Re: NSA-212/Medion Life P89626/P89630: Guide to install SABn

Post by thowi » Wed May 23, 2012 8:58 pm

Updated to use FFP 0.7, uwsiteloader, slacker, easy_install.
So much better now!

Although SABnzbd is still a bit slow.
Considering nzbget...

Post Reply