I just bought a Zyxel nsa 210 drive and configured everything just fine. The only problem is that I cannot access my FTP from outside my LAN.
Filezilla reports that the server sends his internal ip address and not the external one when its time for data communication.
I have port forwardes everything correctly and the problem is my server. I think its impossible that Zyxel hasn't fixed that bug. It should send internal ip when on LAN connection and external when on external connection. Tha think is that I spent 60$ for a drive to support FTP via internet and this one looks like it doesn't.
I don't use the "PPPoE" & "UPnP Port Mapping" options. I dont need them but if these are necessary to configure for ftp access then let me know.
Has anyone ever got it working easily?
Settings on FTP Server:
Service port: 8072
Data port range: 8060-8069
Settings on router:
Service port: 8072
Data port range: 8060-8069 to FTP Server's IP
Code: Select all
Status: Resolving address of nathanas.dyndns.info Status: Connecting to 22.214.171.124:8072... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-You are user number 1 of 3 allowed. Response: 220-Local time is now 13:11. Server port: 8072. Response: 220-This is a private system - No anonymous login Response: 220 You will be disconnected after 5 minutes of inactivity. Command: USER admin Response: 331 User admin OK. Password required Command: PASS ***** Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: TVFS Response: ESTP Response: PASV Response: EPSV Response: SPSV Response: ESTA Response: AUTH TLS Response: PBSZ Response: PROT Response: UTF8 Response: 211 End. Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (192,168,$$$,$$$,31,130) Status: Server sent passive reply with unroutable address. Using server address instead. Command: MLSD