General NAS-Central Forums

Welcome to the NAS community
It is currently Tue Oct 24, 2017 8:01 am

All times are UTC




Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Sat Sep 22, 2012 10:52 am 
Offline

Joined: Mon Dec 12, 2011 2:31 pm
Posts: 11
Well, after a year waiting for ShitCome I can only say: Buy something else ...


Top
 Profile  
 
PostPosted: Sun Sep 23, 2012 11:22 am 
Offline

Joined: Sat Sep 01, 2012 10:02 am
Posts: 9
borisdoli wrote:
Well, after a year waiting for ShitCome I can only say: Buy something else ...


This is very disappointing indeed. I expectyed that after flashing a new firmware version, evrything would keep on working.
Or at least that it could be re-installed. Perhaps you're right, buying another NAS would solve most problems.


Top
 Profile  
 
PostPosted: Fri Sep 28, 2012 7:49 pm 
Offline

Joined: Sat Sep 01, 2012 10:02 am
Posts: 9
Finally, after a lot of googling and trying, I managed to get my printer (Samsung CLP-300) to work as a network printer using my Sitecom MD-254. I don't know if anybody is interested in the solution. I changed a lot of things, perhaps some of them were not necessary. I'll try to write them down in a document and put that in my dropbox.


Top
 Profile  
 
PostPosted: Sat Sep 29, 2012 8:09 am 
Offline

Joined: Sun Jan 01, 2012 2:29 pm
Posts: 12
Hello Jos,
please write down your changes. Sometimes I succeed in using my MD-254 as a printer server using the standard software, but it is not very stable and gives up, I have no strong indication what shuts it down and how to restart it. It looks like a matter of luck.
Thanks,
Chris


Top
 Profile  
 
PostPosted: Sat Sep 29, 2012 8:12 am 
Offline

Joined: Sun Jan 01, 2012 2:29 pm
Posts: 12
Hello to all,
I just found on the sitecom site version 21 of the firmware, did anybody try it?
Thanks,
Chris


Top
 Profile  
 
PostPosted: Sat Sep 29, 2012 8:46 am 
Offline

Joined: Sat Sep 01, 2012 10:02 am
Posts: 9
josvl52 wrote:
Finally, after a lot of googling and trying, I managed to get my printer (Samsung CLP-300) to work as a network printer using my Sitecom MD-254. I don't know if anybody is interested in the solution. I changed a lot of things, perhaps some of them were not necessary. I'll try to write them down in a document and put that in my dropbox.



https://dl.dropbox.com/u/36766279/Print ... omNAS.docx

I wrote down some additional instructions in the document.
After installing software version 2.4.21, I applied all the changes. After that de printer worked :)


Top
 Profile  
 
PostPosted: Mon Oct 08, 2012 10:34 am 
Offline

Joined: Mon Oct 08, 2012 10:22 am
Posts: 4
Hello josvl52

Can you explain a little bit more about how to edit the mentioned files.
I can enter my server with telnet but when i use command LIST or CWD to the mentioned path /etc/sysconfig/.... or other coammands i receive errors that path or files are not available!

Thanks


Top
 Profile  
 
PostPosted: Tue Oct 09, 2012 1:37 pm 
Offline

Joined: Sat Sep 01, 2012 10:02 am
Posts: 9
jodokie wrote:
Hello josvl52

Can you explain a little bit more about how to edit the mentioned files.
I can enter my server with telnet but when i use command LIST or CWD to the mentioned path /etc/sysconfig/.... or other coammands i receive errors that path or files are not available!

Thanks


I used vi editor to edit the files. For instructions on how to use vi there are sevral guides on the internet.


Top
 Profile  
 
PostPosted: Wed Oct 10, 2012 5:35 pm 
Offline

Joined: Mon Oct 08, 2012 10:22 am
Posts: 4
Hello josvl52,

I'am able to login the NAS MD-253 with program putty (connection type telnet) and the login 'toor' pass ........, but I can not use Unix commands like ls or vi, etc.
Only limited to commands like CWD, XCWD, CDUP, PWD (FTP commands), in fact I can do not so much.

Also tried to login with program putty with connection type SSH but mentioned login doesn't work anymore, Access Denied

Is there something I do wrong?

Thanks


Top
 Profile  
 
PostPosted: Sat Oct 13, 2012 5:37 pm 
Offline

Joined: Sat Sep 01, 2012 10:02 am
Posts: 9
jodokie wrote:
Hello josvl52,

I'am able to login the NAS MD-253 with program putty (connection type telnet) and the login 'toor' pass ........, but I can not use Unix commands like ls or vi, etc.
Only limited to commands like CWD, XCWD, CDUP, PWD (FTP commands), in fact I can do not so much.

Also tried to login with program putty with connection type SSH but mentioned login doesn't work anymore, Access Denied

Is there something I do wrong?

Thanks


I use the windows 7 telnet. Perhaps you should install it on WIn 7 first.
When opening a Telnet session with the IP-address of the Sitecom, it start in Superuser mode and I'm able to modify whatever I want. Only when installing a new firmware or doing a factory reset, all changes will disappear.


Top
 Profile  
 
PostPosted: Sun Oct 14, 2012 10:25 am 
Offline

Joined: Mon Oct 08, 2012 10:22 am
Posts: 4
Hello josvl52,

Thanx, this works, I didn't know it whas so easy to get in.

:D :D :D :D :D :D :D :D :D


Top
 Profile  
 
PostPosted: Thu Oct 18, 2012 4:40 pm 
Offline

Joined: Sat Sep 01, 2012 10:02 am
Posts: 9
jodokie wrote:
Hello josvl52,

Thanx, this works, I didn't know it whas so easy to get in.

:D :D :D :D :D :D :D :D :D



Did you succeed in getting your printer to work??

After a reset of the NAS, I saw that the hosts and lmhost file were filled correctly, so I did not have to edit them.
Printcap and the spool directories were gone and I had to create them again with the lp-permission.


Top
 Profile  
 
PostPosted: Sat Oct 20, 2012 1:54 pm 
Offline

Joined: Mon Oct 08, 2012 10:22 am
Posts: 4
Hello josvl52,

Sorry for the late respond.

YES, the Printer works correct.

Thanks for the help.

:D :D :D :D :D :D :D :D :D


Top
 Profile  
 
PostPosted: Thu Dec 05, 2013 11:57 am 
Offline

Joined: Mon Dec 12, 2011 2:31 pm
Posts: 11
Hello, guys.

As I started this thread a few years ago, I had an operational MD-254.
Only the printer server was not working.

Since 2 days ago, it seems to "stall" after some time being ON. Any ideas ?
Upgrading to the latest firmware did not help (or make it worse).
UPDATE: Disconnecting the power supply from the 220V power supply seems to have done the trick.

Secondly, I installed telnet and ssh packages and made them work. I can login.
But, to try to get the printer working, I can not edit /var/spool and some of the other files do not save?
How do I unlock/access/modify the storage to edit the files?

Thank you very much for helping.


Top
 Profile  
 
PostPosted: Thu Dec 26, 2013 12:24 pm 
Offline

Joined: Sat Sep 01, 2012 10:02 am
Posts: 9
borisdoli wrote:
Hello, guys.

As I started this thread a few years ago, I had an operational MD-254.
Only the printer server was not working.

Since 2 days ago, it seems to "stall" after some time being ON. Any ideas ?
Upgrading to the latest firmware did not help (or make it worse).
UPDATE: Disconnecting the power supply from the 220V power supply seems to have done the trick.

Secondly, I installed telnet and ssh packages and made them work. I can login.
But, to try to get the printer working, I can not edit /var/spool and some of the other files do not save?
How do I unlock/access/modify the storage to edit the files?

Thank you very much for helping.


Hello Borisdoli

Perhaps you already solved the problem...


Did you forget to create the lpd and mylp directories and change ownership?

cd /var/spool
mkdir lpd
chgrp lp lpd
cd lpd
mkdir mylp
chgrp lp mylp


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group