Hello to everyone,
this is my first post.
Someone gave me a "broken" md-253. It turns itself on but only blinks the leds: no webinterface, no ip ecc ecc
I cracked it open and connected the serial port to my bus pirate: the bootloader starts but the operating system won't load.
I set up a tftp server and tried to boot from there with no luck.
Someone can please give me a list of commands to boot an image, or reflash the nas from uboot? I searched the section with no luck...
Thank you in advance!
MD-253 & MD-500 Discussion
1 post • Page 1 of 1