Does Network Space 2 support SMB2/3

Post Reply
karallp
Posts: 6
Joined: Fri Jan 08, 2016 7:39 am

Does Network Space 2 support SMB2/3

Post by karallp » Fri Oct 13, 2017 9:27 am

Hi,

I recently installed the Windows 10 update 1703 on my computer. Now I cannot connect to my Lacie Network Space 2 anymore. I read that with this Windows update SMB1 was disabled. Does Network Space 2 only support SMB1? Is there a way to enable SMB2 or 3?

br, Patrick

Jocko
Posts: 99
Joined: Thu Mar 08, 2012 7:47 pm
Contact:

Re: Does Network Space 2 support SMB2/3

Post by Jocko » Sat Oct 14, 2017 12:46 pm

Hi

As this page is updated at sept 28, I assume information is still right with windows 10
https://support.microsoft.com/en-us/hel ... indows-and

karallp
Posts: 6
Joined: Fri Jan 08, 2016 7:39 am

Re: Does Network Space 2 support SMB2/3

Post by karallp » Sun Oct 15, 2017 7:58 am

Hi,

I enabled SMB1 with the PowerShell command (Enable-WindowsOptionalFeature -Online -FeatureName SMB1Protocol). The access still doesn't work. The error I get is "You might not have permission to use this network resource".

br, Patrick

Jocko
Posts: 99
Joined: Thu Mar 08, 2012 7:47 pm
Contact:

Re: Does Network Space 2 support SMB2/3

Post by Jocko » Mon Oct 16, 2017 4:58 pm

Hi,

That would be the expected behavior if you are on the case :
https://thehackernews.com/2017/06/windo ... 3-smb.html

Note: samba server support smb2 only if its version is upper than 3.6 (and version 4 with smb3). So there is no way to change this point with your nwsp2

karallp
Posts: 6
Joined: Fri Jan 08, 2016 7:39 am

Re: Does Network Space 2 support SMB2/3

Post by karallp » Tue Oct 17, 2017 4:56 am

Hi,

Does Network Space 2 only support SMB1? I couldn't find this information anywhere.

br, Patrick

Jocko
Posts: 99
Joined: Thu Mar 08, 2012 7:47 pm
Contact:

Re: Does Network Space 2 support SMB2/3

Post by Jocko » Tue Oct 17, 2017 10:17 am

Hi

According to the GPL sources used by Lacie on a nwsp2, samba version is 3.5.14.
So support only for smbv1

Post Reply