Lacie Network Space 2 after tutorial

Post Reply
Quiquos
Posts: 15
Joined: Wed Jun 01, 2011 12:13 pm

Lacie Network Space 2 after tutorial

Post by Quiquos » Sun Sep 20, 2015 3:21 pm

Hi guys,

really need help.
I followed this tutorial, http://lacie.nas-central.org/wiki/Insta ... space_2%29, and created all partitions ok
Then I reset the Lacie because blue light didnt stop blinking
After that I enter into the Lacie with brower access, and Lacie ask me the name for device, new password, ntp server, everything to initialize the first configuration.
But when I press the finish button it comes with an error:

"20/09/2015, 15:23:01
A problem occurred when initializing your device.
Please try again.
If NTP is selected but server is unreachable, this error can occur."

I have then take off the HDD connect it to a ubuntu livecd, and execute this (last part of first tutorial):

mkfs.xfs /dev/sda2 -f
rm /etc/unicorn.db
reboot

I did the first line because I couldn't find the unicorn.db file to rm!

Any ideas on what could be missing?

btw the hdd is a 1tb hitachi

MikeG
Posts: 2
Joined: Tue Mar 08, 2016 12:11 pm

Re: Lacie Network Space 2 after tutorial

Post by MikeG » Tue Mar 08, 2016 12:18 pm

Could you please provide me with the complete link (below) again with the steps of how you recreated the Network Space 2 partitions.

I followed this tutorial, http://lacie.nas-central.org/wiki/Insta ... space_2%29, and created all partitions ok

thanks

Post Reply