network space 2 dead

Post Reply
lamosca01
Posts: 2
Joined: Wed Oct 29, 2014 11:07 am

network space 2 dead

Post by lamosca01 » Fri Sep 25, 2015 6:28 pm

Hi guys!
It turns out that after restoring my LaCie Network Space 2 (as to hold down the button and turns red and give again) after a few seconds turn off. It is completely dead. I changed my hard drive (with their respective recovery image restored) and nothing. Starts and a few seconds off. Someone could shed some light and help me to see if he returns to work?
Greetings and thank you very much!

Mijzelf
Posts: 6206
Joined: Mon Jun 16, 2008 10:45 am

Re: network space 2 dead

Post by Mijzelf » Sat Sep 26, 2015 7:35 am

You have 3 possibilities:
  1. The box is dead.
  2. The disk is dead.
  3. The content of the disk is damaged
I suggest you to try the standalone kernel from plugout.net to check 1 and 2. This kernel can be injected over network before the box boots, and so isn't dependent on any disk (contents).

What do you mean by "with their respective recovery image restored"?

lamosca01
Posts: 2
Joined: Wed Oct 29, 2014 11:07 am

Re: network space 2 dead

Post by lamosca01 » Sat Sep 26, 2015 10:23 am

Mijzelf wrote:You have 3 possibilities:
  1. The box is dead.
  2. The disk is dead.
  3. The content of the disk is damaged
I suggest you to try the standalone kernel from plugout.net to check 1 and 2. This kernel can be injected over network before the box boots, and so isn't dependent on any disk (contents).

What do you mean by "with their respective recovery image restored"?

Hello!
Thanks for answering. My English is null so I make use of translators. I meant to restore to another hard disk with a drop image internet. Only with that image that not the NAS is turned off. Also clone the original to use the same image but then it is the same hard drive, turns off nothing more start. I'll plugout.net to see if I can revive the device. You have to hand direct links to what can help me?
Greetings and thank you very much!

Mijzelf
Posts: 6206
Joined: Mon Jun 16, 2008 10:45 am

Re: network space 2 dead

Post by Mijzelf » Mon Sep 28, 2015 10:25 am

My English is null so I make use of translators.
In that case you'd better post both the original and the translated text.
The translated text is hard to read, and maybe someone can read your own language, or can try some alternate translations.

You can find the instructions in http://plugout.net/viewforum.php?f=7

Post Reply