THIS SOLUTION 3T INTO DE NEW DISK Rev.2

Post Reply
khons
Posts: 2
Joined: Sun Feb 21, 2016 7:46 pm

THIS SOLUTION 3T INTO DE NEW DISK Rev.2

Post by khons » Mon Feb 22, 2016 6:12 pm

Installing firmware on a new disk (Network space 2) REV.2.0 CubanOldDevice Solutions

Lacie Dashboard

Image
Image

Note: Ubuntu 14 for gdisk and Ubuntu 8 for mkfs.xfs Because mkfs the UBUNTU 14 problem the PARTITION format /dev/sda2 with 0

Connect the new disk to a Linux PC. (A windows PC booted from a Linux Live CD or -usb stick is fine). You can use an USB-SATA converter, or connect the disk on an in- or extern SATA port.

Find the device name of the disk:
cat /proc/partitions

I'll assume the disk is sdb for the rest of the story.

Download gpt3T and all sdan.gz files http://buranplanetgo.mooo.com/lacie
Note: Gpt3T is need HDD =3T or > 3T

You'll need to have root rights to do the next steps. In Ubuntu you can get these by executing
sudo passwd

In most other flavors you just execute

su

Write gpt3T to disk:

dd if=/full/path/to/gp3T of=/dev/sdb

Use fdisk only to remove partition 2 and create full disk
Copy all sdan.gz files to disk:
gzip -dc /full/path/to/sda6.gz | dd of=/dev/sdb6
gzip -dc /full/path/to/sda7.gz | dd of=/dev/sdb7
...

Create swappartition:
mkswap /dev/sdb5

Note: Ubuntu 8 for mkfs.xfs
Format partition 2:
mkfs.xfs /dev/sda2 -f

When you put this disk in your Network Space 2, it should work.

It is also possible that the NAS boots, but doesn't show up in the network, and the blue led is blinking about once a second. In that case try a factory reset. Installing firmware on a new disk (Network space 2)

harckan
Posts: 2
Joined: Fri Mar 25, 2016 7:16 pm

Re: THIS SOLUTION 3T INTO DE NEW DISK Rev.2

Post by harckan » Wed Apr 06, 2016 5:01 am

Hi,

the Gpt3T and others files is off-line in link, new link please?

thanks for all

Post Reply