NSA221 Invalid Firmware file (different from others post)

Oxnas 810 based
Post Reply
Jackal75
Posts: 2
Joined: Tue Oct 06, 2015 8:11 pm

NSA221 Invalid Firmware file (different from others post)

Post by Jackal75 » Tue Oct 06, 2015 8:20 pm

Hi all,
my name is Simone form Italy.
Bought the NSA211 a pair of years ago. Never got any problems except one:
Cannot upgrade firmware in anyway.
I bought 2x HDD WD Red for NAS 1TB and when i insert them the SYS led stucked on blinking and doesn't work.
The HDD's led are both green (so i assume thet the NAS see them), it's like the disks are not present, looking for the HDD compatibility i sow the SATA-3 disks are supported.
So.. tryed to upgrade firmware (actual version is 4.23AFM.0), with the automatic check doen't find any new firmware, so i downloaded manually first fw 4.40AFM and the 4.41AFM (for a sucessive upgrade from 4.40)
Upgrading it manually to the 4.40 version i recived always the error "Invalid Firmware file.
Resetted it to factory defaul without chencging any impostations but same problem.

Any idea?

tnx a lot

Jackal75
Posts: 2
Joined: Tue Oct 06, 2015 8:11 pm

Re: NSA221 Invalid Firmware file (different from others post

Post by Jackal75 » Tue Oct 06, 2015 8:35 pm

To be complete:

already tryed to overwrite fw with the same version but... Invalid Firmware file, from the log i see only:
Firmware upgrade fails, file 423AFM0C0.bin is invalid or corrupted.

Tryed olso with UAC fw versions but same problem

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: NSA221 Invalid Firmware file (different from others post

Post by Mijzelf » Wed Oct 07, 2015 6:18 pm

Are you sure your current firmware is an AFM version?

Post Reply