NSA221 scan results

Oxnas 810 based
Post Reply
TurnerBurn
Posts: 1
Joined: Sat Dec 15, 2012 9:32 pm

NSA221 scan results

Post by TurnerBurn » Sat Dec 15, 2012 9:38 pm

Hello all,

I have a NSA221 and I'm having some issues. First off, I'm not sure what a "normal" volume scan result should look like. I have an empty, new volume created and when I scan it I get this result:

Phase 1 - find and verify superblock...
Phase 2 - using internal log
- scan filesystem freespace and inode maps...
sb_fdblocks 60743795 counted 60744819
- found root inode chunk
Phase 3 - for each AG...
- scan (but don't clear) agi unlinked lists...
- process known inodes and perform inode discovery...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- process newly discovered inodes...
Phase 4 - check for duplicate blocks...
- setting up duplicate extent list...
- check for inodes claiming duplicate blocks...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
No modify flag set skipping phase 5
Phase 6 - check inode connectivity...
- traversing filesystem ...
- traversal finished ...
- moving disconnected inodes to lost+found ...
Phase 7 - verify link counts...
No modify flag set skipping filesystem flush and exiting.


Is this a normal or healthy result?

Thanks!

Mijzelf
Posts: 6199
Joined: Mon Jun 16, 2008 10:45 am

Re: NSA221 scan results

Post by Mijzelf » Mon Dec 17, 2012 12:12 pm

That is a default xfs_repair -n output. I don't know what it means, but the filesystem is OK.

Post Reply