help! unable to do any of the FFP

Oxnas 810 based
Post Reply
snowy89
Posts: 1
Joined: Fri Jun 21, 2013 4:04 am

help! unable to do any of the FFP

Post by snowy89 » Fri Jun 21, 2013 4:18 am

Hi all,

I've been scurrying all over for details regarding how to use this magic stick called FFP Stick. So far i've tried the means given by the internet and have ended up nothing. I have no knowledge of Linux or whatsoever that runs the lil black box..

So far i've learnt is that :

1) NAS runs on Linux OS
2) FFP is used to allow users to run more applications on the NAS itself.

I've tried doing the steps but results ...

1) tried to upload manually thru ftp but failed due to certain write permission error (?)
2) Whenever i plug my USB stick at the back port, NSA221 will automatically makes a copy of the contents and after a restart, it remains same
3) tried the telnet backdoor and it opens a blank page.

What i have done so far:

1)updated the Firmware to 4.40 (AFM.0)
2) only installed a 1.5TB Seagate HDD
3) torrent downloading thru its (slower then my pc) downloader.

Any can help? Mijzelf if you see this, please advice me this newbie.

Mijzelf
Posts: 6226
Joined: Mon Jun 16, 2008 10:45 am

Re: help! unable to do any of the FFP

Post by Mijzelf » Fri Jun 21, 2013 9:38 am

snowy89 wrote:1) tried to upload manually thru ftp but failed due to certain write permission error (?)
Is this releated to your attempts to create an FFP stick?
2) Whenever i plug my USB stick at the back port, NSA221 will automatically makes a copy of the contents
Have a look in the administration pages, at the USB copy function. Maybe you can switch this off. Doesn't the 221 has a copy button?
and after a restart, it remains same
Does the stick meet all requirements? Only one partition, FAT Formatted? Is an ffpboot.log made?
3) tried the telnet backdoor and it opens a blank page.
'it' is your browser, I suppose. That is normal behavior. After that you should be able to login over telnet.

Post Reply