General NAS-Central Forums

Welcome to the NAS community
It is currently Wed Dec 13, 2017 11:11 am

All times are UTC




Post new topic Reply to topic  [ 32 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
 Post subject: Re: NAS fresh disk
PostPosted: Mon Apr 06, 2015 4:23 pm 
Offline
User avatar

Joined: Mon Apr 06, 2015 7:34 am
Posts: 31
Location: Indonesian
And result from your guide create partition is :

Image
My According is Success

Now I next execute mkswap /dev/sda5 is :

Image
My According is Success

and next I execute mke2fs -j /dev/sda7,sda8, & sda9 is :

Image
My According is Success

Image
My According is Success

Image
My According is Success

And next I execute mkfs.xfs -f /dev/sda2 is :

Image
My According is Success

But now am found less problem with gzip -dc is :

Image
My according indication Fail Execute command

while the data is there is :

Image

Did you know to solved it ? Thank for kind word :roll:


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Mon Apr 06, 2015 5:45 pm 
Offline

Joined: Wed Mar 18, 2009 11:13 pm
Posts: 775
oops I made a small error in my partition table with partion 9
it must be this
now make the logical partitions
Code:
#logical partitions:
n(ew) l(ogical) 5 9 40
n l 6 41 48
n l 7 49 56
n l 8 57 160
n l 9 161 272
n l 10 273 280

The start sector of partition 9 I forgot to mention (161), sorry for this. You need to redo it, you could try to delete only partition 9 in fdisk and then recreate with the commands
Code:
n l 9 161 272


This should eliminate the last sector warning and the performance warning.

Op failing to write to sda6.gz. This is caused because you must have specified a wrong path so gzip cannot find the file. Apparently /home/musafirr/Desktop is not the right path. Be aware that in Linux directory names are case-sensitive so probably Desktop must be desktop


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Mon Apr 06, 2015 6:30 pm 
Offline
User avatar

Joined: Mon Apr 06, 2015 7:34 am
Posts: 31
Location: Indonesian
Oke no problem with small error will be Big Greater :D

I will try change partition 9 from 272 to 161 272 ya ?

So, Please you tell me where error case-sensitive I supposed i got it right /home/musafirr/Desktop "D" for Desktop is Capital letter..

Image

CMIIW :roll:


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Mon Apr 06, 2015 6:45 pm 
Offline

Joined: Wed Mar 18, 2009 11:13 pm
Posts: 775
I overlooked the error
do not use the "=" before /home
so gzip -dc /home/... instead of gzip -dc =/home


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Mon Apr 06, 2015 7:04 pm 
Offline
User avatar

Joined: Mon Apr 06, 2015 7:34 am
Posts: 31
Location: Indonesian
fvdw wrote:
I overlooked the error
do not use the "=" before /home
so gzip -dc /home/... instead of gzip -dc =/home


OMG ... I follow previous guide the show below here :

Image

Oke, now i'll tried again with your guide ...


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Tue Apr 07, 2015 12:23 pm 
Offline
User avatar

Joined: Mon Apr 06, 2015 7:34 am
Posts: 31
Location: Indonesian
From all guide i've done config on HD, And finally I test insert to D2 Network 2 with firmware 2.2.10 on device, But I back found problem time for reset cannot success just blink blue indicator (not red indication reset in D2N2 ), According previously thread did influence if my D2N2 has been 2.2.10 type of firmware on D2N2 ? Please related this ?

According previous tutorials below here :

Image


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Tue Apr 07, 2015 4:49 pm 
Offline

Joined: Wed Mar 18, 2009 11:13 pm
Posts: 775
Sorry but I do not use the lacie firmware myself so can not advice you with this issue. We developed our own.(fvdw-sl). Currently we have a project running to get support for D2 network2 which is succesful. Our firmware is already running on it, some minor optimizations are still in progress. See http://plugout.net subforum development. Maybe it is an alternative you could consider.


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Tue Apr 07, 2015 6:11 pm 
Offline
User avatar

Joined: Mon Apr 06, 2015 7:34 am
Posts: 31
Location: Indonesian
Hello

Please correction with picture below here :

Image

Did notice '' dd: writing to '/dev/sdb10': No space left on device ''

To be a new fresh hardisk fatal damage ? Any have idea for solved this ?

NOTE : I new tried use new hardisk capacity is 250GiB for learn if dhange capacity


Last edited by musafirrlail on Tue Apr 07, 2015 6:24 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Tue Apr 07, 2015 6:18 pm 
Offline
User avatar

Joined: Mon Apr 06, 2015 7:34 am
Posts: 31
Location: Indonesian
fvdw wrote:
Sorry but I do not use the lacie firmware myself so can not advice you with this issue. We developed our own.(fvdw-sl). Currently we have a project running to get support for D2 network2 which is succesful. Our firmware is already running on it, some minor optimizations are still in progress. See http://plugout.net subforum development. Maybe it is an alternative you could consider.


After I make sure about hardisk on D2N2 something trouble with my way reset D2N2, And i've tried search on ytube and I got below here :

https://www.youtube.com/watch?v=zuoFRMT4gwQ


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Tue Apr 07, 2015 6:19 pm 
Offline

Joined: Wed Mar 18, 2009 11:13 pm
Posts: 775
musafirrlail wrote:
Hello

Please correction with picture below here :

Image

Did notice '' dd: writing to '/dev/sdb10': No space left on device ''

To be a new fresh hardisk fatal damage ? Any have idea for solved this ?

No there is no damage it is perfectly ok. There is no damage to the HDD.
The command you gave is filling the whole partition with zero's. It does that if you use this command until it is completely full and then aborts with the message you got


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Tue Apr 07, 2015 6:27 pm 
Offline

Joined: Wed Mar 18, 2009 11:13 pm
Posts: 775
Why do you do a factory rest, if you have prepared a new disk it should boot and no factory reset is required.

If the power led remains blinking it probably means the diks is not prepared correctly and boot failed.
Is the blinking regular (with fixed intervals like a blinking light of a car) or does it sometime flicker fast and slow like harddisk led of your pc ?


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Tue Apr 07, 2015 6:45 pm 
Offline
User avatar

Joined: Mon Apr 06, 2015 7:34 am
Posts: 31
Location: Indonesian
[SOLVED CASE WITH LINK BELOW HERE]

https://drive.google.com/file/d/0B8OILEzfjIVPS3FaaGtRTmZPaW8/view?usp=sharing

Thanks for all a kindly word ;)


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Wed Mar 09, 2016 5:40 pm 
Offline

Joined: Wed Mar 09, 2016 5:32 pm
Posts: 1
Hello everyone,

First of all sorry for reviving an old thread, but I wanted to make an account just to ask this question that's bugging me for years (yes years).

I have a couple of d2 n 2's around. I managed to upgrade the HDD's in them a couple of times now, from the stock Samsung, to WD greens (1TB) and now WD blues (2TB).

Everything works fine and it's peachy EXCEPT one thing ...

I CAN'T UPDATE THE GOD DAMN THING. I've tried to update the devices in every possible way, with the desktop software, creating a share and putting the capsule files in it, from the web interface ... nothing works. Hangs for hours (or days) and nothing updates.

This time I made the partitions bigger (just in case) like this:

Device Boot Start End Blocks Id System
/dev/sdb1 1 270 2167751 5 Extended
/dev/sdb2 271 243201 1951343257+ 83 Linux
/dev/sdb5 1 33 263024+ 82 Linux swap
/dev/sdb6 34 35 15041 83 Linux
/dev/sdb7 36 37 15041 83 Linux
/dev/sdb8 38 150 906648+ 83 Linux
/dev/sdb9 151 260 882551 83 Linux
/dev/sdb10 261 266 47171 83 Linux

And I am sure it's plenty of room for system, kernel image and snapshots, but I STILL can't update the device from 2.2.5 ...

Any ideeas ? I really want them updated for time machine compatibility.


Thankyou very much in advance !


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Mon Jan 30, 2017 2:31 pm 
Offline

Joined: Sat Mar 15, 2014 9:30 am
Posts: 36
Hello !

More than 3 years have passed, and my Lacie D2 network 2 (3TB Version) is collecting dust

I have tryed this tutorial without success ...
http://lacie.nas-central.org/wiki/Insta ... _Network_2)
Perheaps this works only for the 1TB / 2TB versions

Did anyone succeded recovering a Lacie D2 network 2 that was shipped with 3TB ?

Thank You


Top
 Profile  
 
 Post subject: Re: NAS fresh disk
PostPosted: Tue Jan 31, 2017 5:32 pm 
Offline

Joined: Wed Mar 18, 2009 11:13 pm
Posts: 775
Probably the bootloader of a D2 network 2 doesnt support GPT partition tables, needed to use 3TB disk. A msdos partion table can only address 2TB disk space. If you have used a gpt table to bootloader cannot read the disk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 32 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group