I have crashed the hard drive on my d2 network (not the v2) it´s the old one with ARM926EJ processor. Looked around this forum for ages - but i´m not sure the partitions and images from the other LaCie NAS is going to work, since they are Marvel based.
Any help or answers would be appreciated? Does the linux system work on both types of processors??
I have contacte LaCie they say the repair is 69€ - But I have alredy bought a new 1TB drive..
Thx in advance.
2 posts • Page 1 of 1
The file /sda7/lib/lacie/libutil from the NS2 contains this snippet of code:
The 2Big runs fine on the EdMini2 kernel/partitions, and your D2 is in the same list. So you could just try them. It will boot or not.
Code: Select all
#============================================================================== # Products' ID #============================================================================== ID_EDMINIV2=EDminiII ID_EBIGDISK=EBigDisk ID_D2NETWORK=d2Net ID_BIGNETWORK=BigNet ID_2BIGNETWORK=2Big ID_5BIGNETWORK=5Big # Kirkwood based boards ID_NETSPACE_V2=netspace_v2 ID_INETSPACE_V2=inetspace_v2 ID_NETSPACE_MAX_V2=netspace_max_v2 ID_D2NET_V2=d2net_v2 ID_NET2BIG_V2=net2big_v2 ID_NET4BIG_V2=net4big_v2 ID_NET5BIG_V2=net5big_v2