2big network2 Replaced HDD with 2x 3TB?

Post Reply
N678
Posts: 4
Joined: Fri May 27, 2011 10:46 pm

2big network2 Replaced HDD with 2x 3TB?

Post by N678 » Thu Dec 17, 2015 9:02 am

Discs of my NAS lacie 2big network2 failed, I replaced for 3TB drives.
I have already installed the disks but the same will not boot.

I will follow this guide to http://lacie.nas-central.org/wiki/Insta ... s_(2Big_2) to install the firmware on the disks.

I'm in doubt is to create the partitions, because I want to use the 3TB.

what settings to create partitions on GPT? (http://lacie.nas-central.org/wiki/Insta ... partitions) can someone give an example?

best regards,
nelson

Post Reply