Hi Everyone. I originally have a 6TB (2x3TB) NSM at RAID 0. In a moment of panic, I bought a NSM 4TB thinking it was a controller card issue because the drives seem to be ok.
Long story short, one of the 3TB has read issue and is dead.
So I was trying to rebuild the 3TB with a fresh start with the 2TB and hoping to resize SDA2 and SDB2 to max size.
I clonezilled the 2TB to the 3TB (twice...for each drive). Plugged it back in and it does not work. Tried factory reset, etc.
1 post • Page 1 of 1