StorCenter 500GB (1HD) cloning HD to another one

Post Reply
Posts: 1
Joined: Fri Mar 11, 2016 10:46 am

StorCenter 500GB (1HD) cloning HD to another one

Post by Franco19969 » Fri Mar 11, 2016 10:56 am

Hi, i've two NAS: Iomega StorCenter 500GB with 1HD. They were twins.

One is perfect and running.
The other one has a failed HD.

I've tried to replace the HD but Power LED Indicates that the StorCenter is Booting for More than 10 Minutes and then not works properly.

My question is possible to clone the HD from the NAS that works and then put new HD cloned in the second NAS ?

Is there a smarter operation to follow ?

If Yes, how can i proceed ? What softare i've to use ?

Thanks for your support and thanks for all.

Posts: 4
Joined: Mon Aug 01, 2016 3:01 pm
Location: new york

Re: StorCenter 500GB (1HD) cloning HD to another one

Post by jacobwilliam1985 » Wed Aug 24, 2016 7:42 pm

For backing up data, there's no shortage of alternatives to choose from. Few, however, are as simple and straightforward as simply cloning your hard drive. If you need to copy all of your data, or want to safeguard against a corrupted or physically damaged hard drive, having a functional copy of the drive you can immediately turn to is hard to beat. And unlike some backup strategies, which require regular attention or convoluted tools, cloning a drive is a relatively uncomplicated affair.

Post Reply