General NAS-Central Forums

Welcome to the NAS community
It is currently Tue Jan 16, 2018 11:36 am

All times are UTC




Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Upgrade Firmware device
PostPosted: Tue Aug 27, 2013 8:10 am 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
i have a problem with ix-200.
one of two disk it's damaged and i cand upgrade firmware means graphic interface.
how can I do? :mrgreen:


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 8:15 am 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
it's possible enter in SFTP, put the .tgz, reboot and the device reload new firmware?


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 8:34 am 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6122
FOOLiSH wrote:
i cand upgrade firmware means graphic interface.
Which fw version do you have, and which fw version are you trying to upload?


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 8:41 am 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
now i have 2.1.30.10908 and i try to upgrade 2.1.38.22294 and after 2.1.42.18967


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 9:17 am 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
it's possible copy data in SFTP?
where are?


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 11:04 am 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6122
sftp? Why should that work?

Anyway, you can create a recovery stick, and use it. This has as disadvantage that it will delete your data, as it does a full factory reset, including generating a new data partition.

You can also use this pre-prepared recovery stick. It wll turn your ix2-200 into an ix2-200 CE. You'll have to do the procedure twice. The first time you'll have to rename the directory emctools/ix2-200d_images/ to emctools/ix2-200_images/. Then the CE kernel is flashed to rom. Rename it back, and the userland is installed to harddisk.
This will delete your data!


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 12:34 pm 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
can i access to my file in device from sftp?
i see all folder but i don't find my data


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 1:40 pm 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6122
Your data should be in /mnt/pools/A/A0/


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 2:18 pm 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
i have only /mnt/apps/ :o


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 6:25 pm 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6122
Oh dear. Then you have more problems than 'just' a crashed disk. Can you post the output of
Code:
cat /proc/partitions
cat /proc/mounts
cat /proc/mdstat


Top
 Profile  
 
PostPosted: Thu Aug 29, 2013 7:19 am 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
Code:
root@STORAGE:/# cat /proc/partitions
major minor  #blocks  name

   7     0     261669 loop0
   7     1       5120 loop1
   7     2        456 loop2
   8     0 1953514584 sda
   8     1    2040223 sda1
   8     2 1951474329 sda2
  31     0        768 mtdblock0
  31     1        128 mtdblock1
  31     2       3072 mtdblock2
  31     3       3072 mtdblock3
   9     0    2040128 md0
   9     1 1951474192 md1
   8    16 1953514584 sdb
   8    17    2040254 sdb1
   8    18 1951474329 sdb2
 253     0 1951473664 dm-0
root@STORAGE:/# cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root.old /initrd ext2 rw 0 0
none / tmpfs rw 0 0
/dev/md0 /boot ext2 rw,noatime 0 0
/dev/loop0 /mnt/apps ext2 ro 0 0
/dev/loop1 /etc ext2 rw,noatime 0 0
/dev/loop2 /oem cramfs ro 0 0
proc /proc proc rw 0 0
none /proc/bus/usb usbfs rw 0 0
none /proc/fs/nfsd nfsd rw 0 0
none /sys sysfs rw 0 0
devpts /dev/pts devpts rw 0 0
tmpfs /mnt/apps/lib/init/rw tmpfs rw,nosuid 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
/dev/mapper/md1_vg-md1vol1 /mnt/soho_storage xfs rw,noatime,logbufs=8 0 0
root@STORAGE:/# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4]
md1 : active raid1 sdb2[1] sda2[0]
      1951474192 blocks super 1.0 [2/2] [UU]

md0 : active raid1 sdb1[1] sda1[0]
      2040128 blocks [2/2] [UU]

unused devices: <none>


This night has rebuilt the raid, deleting data. Fortunately I have another disk with the data


Top
 Profile  
 
PostPosted: Thu Aug 29, 2013 7:35 am 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6122
Quote:
This night has rebuilt the raid, deleting data. Fortunately I have another disk with the data

I see. Did that also solve your firmware update problem?
Quote:
/dev/mapper/md1_vg-md1vol1 /mnt/soho_storage xfs rw,noatime,logbufs=8 0 0
At least this is changed, as you had only a /mnt/apps.


Top
 Profile  
 
PostPosted: Thu Aug 29, 2013 9:29 am 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
can i see my data if i connect disk to linux pc?
partitions are in lvm2 format


Top
 Profile  
 
PostPosted: Thu Aug 29, 2013 10:45 am 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6122
Yes. http://ix2-200.wikidot.com/recover


Top
 Profile  
 
PostPosted: Thu Aug 29, 2013 12:53 pm 
Offline

Joined: Tue Aug 27, 2013 8:03 am
Posts: 13
in this machine i have a raid1 for my data,
mdadm: only give one device per ARRAY line: /dev/md/FOOLiSH and DATA
mdadm: cannot open /dev/sdh2: Device or resource busy

linux don't recognize lvm2 partition. the packet lvm2 it's installled


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group