IX2 Strocenter NHDD2M need an image file please

StorCenter ix2-200 Network Storage
Post Reply
Prestinox
Posts: 3
Joined: Sun Mar 23, 2014 12:32 pm

IX2 Strocenter NHDD2M need an image file please

Post by Prestinox » Mon Mar 24, 2014 11:59 am

Hello,

Thanks to excuse my english, I use it only for photography :mrgreen:

I have an old IX2-0 NHDD2M IOMEGA NAS to install but I need an image file to put on 0 disk. It seems to be the solution.
I only need shared space for familly on the lan and have 2 old 500 Gb SATA II drives.
I also need to install last firmware before as I saw.

I can use Gpart on an USB key but all I see is... The key !!! So I'm not knoledged with Linux exept to use it as end user. I have a free PC to install anything on it ;)

Does anyone can help me to do this job ?

Thanks,

Fabrice

Diginas
Posts: 36
Joined: Sat Mar 15, 2014 9:30 am

Re: IX2 Strocenter NHDD2M need an image file please

Post by Diginas » Fri Nov 06, 2015 9:14 am

Prestinox wrote:Hello,

Thanks to excuse my english, I use it only for photography :mrgreen:

I have an old IX2-0 NHDD2M IOMEGA NAS to install but I need an image file to put on 0 disk. It seems to be the solution.
I only need shared space for familly on the lan and have 2 old 500 Gb SATA II drives.
I also need to install last firmware before as I saw.

I can use Gpart on an USB key but all I see is... The key !!! So I'm not knoledged with Linux exept to use it as end user. I have a free PC to install anything on it ;)

Does anyone can help me to do this job ?

Thanks,

Fabrice
Hello!

Have you sucessfully restored yours ?
Mine is with same problem, here is my topic:
viewtopic.php?f=297&t=17909&p=98733&hilit=nhdd2m#p98733

Thank YOu

Post Reply