IX2 UPS support - update

StorCenter ix2-200 Network Storage
Post Reply
machadojon
Posts: 18
Joined: Tue Jun 07, 2011 10:59 pm

IX2 UPS support - update

Post by machadojon » Sun Jul 20, 2014 4:55 am

Hi Mike,
I have a IX2 that it is not working with my new models Back-UPS BZ1200. This it is not a smart version, so I believe that I need to update the drive list or theapcupsd.
I an new with Linux and do know how to do!

I adquire the ups no break because of electrical issue I just lost 2 HD. I use your recover USB to install a new hd. TCS

Regards,
Jonathan

machadojon
Posts: 18
Joined: Tue Jun 07, 2011 10:59 pm

Re: IX2 UPS support - update

Post by machadojon » Sun Jul 20, 2014 5:55 am

I found this, but I cant understaing and apply in the IX2
regards
http://forums.freenas.org/index.php?thr ... -nt.20247/

machadojon
Posts: 18
Joined: Tue Jun 07, 2011 10:59 pm

Re: IX2 UPS support - update

Post by machadojon » Sun Jul 20, 2014 6:50 am

Looks like that didnt reconize as an ups
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 8 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=6001 Rev= 4.00
S: Manufacturer=FTDI
S: Product=USB <-> Serial
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

Post Reply