Just to share an issue host name I had by updating to version 184.108.40.206716.
After update has finished, the network was not able to recognize ix2-2 host name and all the hosts needing to connect through this alias was not working correctly (Samba and NFS mounting mainly).
I try many things like rebooting the nas, changing IP in /etc/hosts/ and some other desperate stuffs as my network knowledge is very light. On my router (DHCP Information) I can see the IP appearing but not the hostname (this my ISP router which is a Huawei HG8045)
Finally I sort it out even if I am not sure it was the proper way to do but I did the following:
- connect via ssh
- try to restart my network interface by running
- I saw a message saying
can't create /var/lib/dhcp/dhclient.eth0.leases: No such file or directory
and the alias ix2-2 was still not able to be seen by the others network hosts
- I copy paste /var/lib/dhcp3/ to /var/lib/dhcp/ and changed the old IP in /var/lib/dhcp/dhclient.eth0.leases to the new one
- I run once again
- hosts can be reach ix2-2 alias
The DHCP Information view of my router still not displayed the host name but the main thing is that host can see it now through the alias ix2-2.
Also strange thing is after reboot NAS, the folder /var/lib/dhcp/ was gone
If someone has an explanation I would be more than happy to understand, in the meantime if someone has the same issue I hope this post will help.
PS: Also NFS mounting was not working properly and I had to remove from the web interface the host and re-add it again then OK