hi guys, hope someone can help me, as l have run out of ideas.
6 months ago, hdd 1 failed and replaced with a WD Red 3TB. Raid rebuilt successfully, no problems.
Recently hdd 2 was reporting that could it fail so l replaced with another WD Red 3TB, Raid rebuilt successfully, no problems.
At this point l decided to do a factory reset from within the Iomega web interface, so l could take advantage of the additional space on the new hdss. The web interface was telling me it was wiping the disks, but remained at 0% for 48 hours.
I figured something was wrong so rebooted the NAS, but it didnt come back to life.
I removed both WD Red 3TB disks and inserted the original Seagate 1Tb disk into Slot 1. NAS boots fine, no problems, except web interface is telling me that the disk could fail.
So l then shutdown NAS and add WD Red 3TB to Slot 2. NAS doesn't boot, just get flashing white light even after leaving it overnight.
Have repeated the last two steps with the other WD Red 3TB and the Seagate 1TB, but same problem.
Ix2-200 Cloud Edition running 18.104.22.168167