Bricked U-boot?

StorCenter ix2-200 Network Storage
Post Reply
hectorcamp
Posts: 2
Joined: Tue Jun 14, 2016 12:00 am

Bricked U-boot?

Post by hectorcamp » Sun Jun 19, 2016 8:11 am

I used this tutorial : http://lars.karlslund.dk/2011/11/recove ... d-upgrade/
And now my ix2-200:
front leds off
RJ45 led blinking but not IP
HD Spin.
UART : no output (blank screen)

I bricked my U-boot?
Is there any recovery via Jtag or another?

Thanks

Mijzelf
Posts: 6194
Joined: Mon Jun 16, 2008 10:45 am

Re: Bricked U-boot?

Post by Mijzelf » Sun Jun 19, 2016 12:55 pm

If you had serial output before, and now not anymore, than either your u-boot or your board itself is damaged. I'm not aware of a JTAG connection on the board. You can have a look if kw-boot works for your hardware.

Post Reply