yesterday i fixed my ix2-dl with the latest firmware with recovery file.
the recovery file i found it on this page: https://deepwater.lenovo.com/wiki/index ... =Downloads
when i run the .exe i have an usb stick with all features.
i put the usb stick on linux pc (run on vmware workstation) and i saw the files, i copy the files from vm to my pc and i format my usb as fat32 and i put the files on it:
emctools\ix2-ng_images\imager.tgz (i rename it) and i delete all other files.
from images folder i copy the files on vm to the folder: home/serafino (serafino is the vm name) and i put my hard disk 2Tb with usb kit on vm and i run these comands:
dd if=/home/serafino/zImage of=/dev/sdb bs=512 seek=2048
dd if=/home/serafino/initrd of=/dev/sdb bs=512 seek=8192
then i have secure disconnect the disk from vm and pc and i put it on my nas box, put the usb stick and disconnect the lan cable.
with power button pressed i put the power cable on the nas after 3 seconds the leds are red and after 35 seconds the white led blinking and the blue led light. just now the recovery are started and i leave the power button.
after 8 minutes the nas was will automatically shut down. Unplug the USB disk put the lan cable and power on the NAS.
after 3-4 minutes you can connect to the webinterface(The NAS it has an ip address from dhcp and you must find it).
the unencrypted file i 'll try to put on the internet, when i upload it i put here the link.