So we have an issue with one of our Lacie 5big Network boxes here.
One is working fine, running version 2.2.8
The other is running 2.1.1, and under system / RAID - Disk Status it shows 1 as being broke, 3 (spare) as grey and the other 3 are clean. Unsure why, if 1 is broken, it is not failing over to the spare.
The lights on the back of the actual LaCie box show all solid blue. If i reboot the LaCie - all 5 show as working fine in the admin console for around 5 minutes - then it reverts to the above.
This is RAID 5.
Currently I am trying to update the firmware - thinking there may be a communication issue. There is nothing on the internet that I can find, that provides me with the backend update for 2.1.1 so i can update to any newer version. Nowhere! I realize they stopped supporting this software, but come on! This must exist somewhere.
I did stumble upon Plugout and the fvdw-sl console. I have browsed through this, installed the console and downloaded the appropriate rars for the 5big Network. I have yet to actually run any of this, though.
Any ideas why the box would show solid blue in the back, but the web console shows as disk 1 = red? Any idea where i can get the older backend update so i can actually update the firmware without going the Plugout route?
1 post • Page 1 of 1