NAS Don't Work

Post Reply
zof04
Posts: 1
Joined: Thu Jan 12, 2017 12:59 pm

NAS Don't Work

Post by zof04 » Thu Jan 12, 2017 1:09 pm

Good afternoon,

My NAS 5big Network 2 broke all the disks and put new ones there, but it does not start now.
I already talked to the technical support, but they say it is out of warranty and can not do anything.
My NAS is 10Tb with 5 * 2TB disks. I would like to know if someone can help me to configure at least 1 disk for it to boot and then put the others.

Regards Bruno.

Mijzelf
Posts: 6194
Joined: Mon Jun 16, 2008 10:45 am

Re: NAS Don't Work

Post by Mijzelf » Mon Jan 16, 2017 8:34 am

Have a look at the plugout.net forum. They have custom firmware for most Lacie boxes.

The official firmware from Lacie is hard to install, as it's not intended to be installed by end users.

Post Reply