General NAS-Central Forums

Welcome to the NAS community
It is currently Mon Mar 19, 2018 2:59 am

All times are UTC

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Sat Mar 24, 2012 8:35 pm 

Joined: Sat Mar 24, 2012 8:17 pm
Posts: 1
Hi all,

I have two wirelessspace routers in my home network. Devices are instaled in different home regions and broadcast their own wifi networks. They are connected with UTP cable (LAN-LAN). Currently I use 1.router + 2.AP config - it works but I would like to config them as 1. router + 2. router in order to have more LAN ports available in 2. - by connecting LAN of the first device with WAN port of the second one. I have tried to change LAN interface settings for second device but with no success. What settings should I use to obtain router+router config with all HDD resources visible in my home network?

PostPosted: Mon Apr 09, 2012 5:16 am 

Joined: Mon Apr 09, 2012 4:02 am
Posts: 2
meofiz: I don't have an answer but I can see some potential difficulties. Firstly, where is the DHCP server (assigns IP addresses to all other devices) on your network? "Router" generally means a device which includes a DHCP server and more than one DHCP server on a network generally means trouble (because they will likely issue conflicting IP addresses). Connecting two WS on a single network will mean that at least one of them has to be in "switch" mode and that means that its internet port has no function.

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group