NAS+Switch Problems

Post Reply
M4T
Posts: 2
Joined: Mon Apr 09, 2012 4:02 am

NAS+Switch Problems

Post by M4T » Mon Apr 09, 2012 4:40 am

WS is configured as NAS+Switch with wifi client (configuration #2 in manual) and connects into existing network via wifi. Everything works fine - NAS is accessible throughout the network and computer connected to ethernet port on WS can also access all devices on network and be accessed from all network. Except.....computer cannot reach internet. Also computer unable to bring up admin page for gateway/router/modem/DHCP server (which can be done from anywhere else on network).

Have tried 3 alternatives for setting IP on WS - DHCP, static within network DHCP server range, static outside of DHCP server range. Same results for all 3 although sometimes randomly can get through to internet and router admin page when using DHCP mode.

Suggestions and help very welcome!!!! Thanks.

Post Reply