HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Marvell Kirkwood based
Post Reply
Grego
Posts: 18
Joined: Tue Nov 03, 2015 1:54 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by Grego » Sat Jun 03, 2017 9:06 am

Feedback
Minidlna 1.2.0 not resume movie :(

But it works wonderfully well.
I am looking for a solution on the internet to resume movies

Bye
D-Link DNS-320 rev A1 - MiniDLNA 1.2.0 (barmalej2)
TV Samsung UE48JU6400
TV Samsung UE32ES5500

barmalej2
Posts: 2382
Joined: Sun Apr 29, 2012 5:24 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by barmalej2 » Sat Jun 03, 2017 9:58 am

Was it supported with earlier versions of MiniDLNA?

Grego
Posts: 18
Joined: Tue Nov 03, 2015 1:54 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by Grego » Sat Jun 03, 2017 10:01 am

Yes, Minidlna version 1.1.5 you have released resume movies
D-Link DNS-320 rev A1 - MiniDLNA 1.2.0 (barmalej2)
TV Samsung UE48JU6400
TV Samsung UE32ES5500

barmalej2
Posts: 2382
Joined: Sun Apr 29, 2012 5:24 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by barmalej2 » Sat Jun 03, 2017 10:06 am

Was it supported on both your Samsung TV's or only one of them?

Grego
Posts: 18
Joined: Tue Nov 03, 2015 1:54 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by Grego » Sat Jun 03, 2017 10:30 am

MiniDLNA 1.1.4 not resume
MiniDLNA 1.1.5 resume
MiniDLNA 1.1.6 I don't know, I never installed
MiniDLNA 1.2.0 not resume

When resume work, I supported my 2 tv samsung.

Stop movie on Room Tv
Play movie on bedroom tv
Vice-versa :)

Embarrassing but not serious.
MiniDLNA 1.2.0 works very very good
D-Link DNS-320 rev A1 - MiniDLNA 1.2.0 (barmalej2)
TV Samsung UE48JU6400
TV Samsung UE32ES5500

barmalej2
Posts: 2382
Joined: Sun Apr 29, 2012 5:24 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by barmalej2 » Sat Jun 03, 2017 10:52 am

Wanna help to figured out, which commit broken it?
This action might involve installing a lot versions of minidlna, but it might help to program author quicker to figure out, where the problem is.

Grego
Posts: 18
Joined: Tue Nov 03, 2015 1:54 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by Grego » Sat Jun 03, 2017 10:59 am

I installed on new config MiniDLNA 1.2.0 after change one HDD and all format partition on JBOD
How help author ?
minidlna is a great program

Sorry I french, my english is bad :(
D-Link DNS-320 rev A1 - MiniDLNA 1.2.0 (barmalej2)
TV Samsung UE48JU6400
TV Samsung UE32ES5500

barmalej2
Posts: 2382
Joined: Sun Apr 29, 2012 5:24 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by barmalej2 » Sat Jun 03, 2017 11:08 am

Simple. I can provide different packages, based on Minidlna source code changes in git, you can test each of them and let me know which one works, which not. Knowing what change in source code broken resuming feature, should help author to fix it.

Grego
Posts: 18
Joined: Tue Nov 03, 2015 1:54 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by Grego » Sat Jun 03, 2017 11:22 am

Why not ? If I can help at my level, I am ready
D-Link DNS-320 rev A1 - MiniDLNA 1.2.0 (barmalej2)
TV Samsung UE48JU6400
TV Samsung UE32ES5500

barmalej2
Posts: 2382
Joined: Sun Apr 29, 2012 5:24 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by barmalej2 » Sat Jun 03, 2017 12:23 pm

In that case here is first test candidate:
http://downloads.zyxel.nas-central.org/ ... -arm-1.txz
Use the following scenario to install test packages:

Code: Select all

sh /ffp/start/minidlna.sh stop
cd /ffp/funpkg/cache/br2
wget http://url/to/package.txz
funpkg -u package.txz
sh /ffp/start/minidlna.sh start
Test bookmarks/resuming.

Doky
Posts: 13
Joined: Thu Mar 20, 2014 6:28 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by Doky » Sat Jun 03, 2017 3:01 pm

Hi!

Problem: Finish install minidlna, work... and reboot nas and no sshd service.. :/

slapt-get --upgrade

command, updating openssl and openssh package... openssl and openssh bugged?!

barmalej2
Posts: 2382
Joined: Sun Apr 29, 2012 5:24 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by barmalej2 » Sat Jun 03, 2017 5:25 pm

Doky wrote: Problem: Finish install minidlna, work... and reboot nas and no sshd service.. :/
Please be so kind and provide more details:
1. Your NAS model
2. Which ffp version is used: ffp usb-stick or ffp-zypkg?
3. Which ssh service is used: ffp-openssh, zyxel firmware ssh, metarepository & dropbear? Keep in mind that several sshd services can not be used at one time.
Doky wrote: slapt-get --upgrade
command, updating openssl and openssh package... openssl and openssh bugged?!
Upgrade command does that is obvious. It upgrades all (not just openssl and openssh) installed packages to updated versions, if they are available on br2 repository.
No, of course openssl and openssh are not bugged, either way both of them will not be available. You are not the first one, who used slapt-get --upgrade, but you are first one, that reported problems with ssh daemon service after upgrading. That means something went wrong or you have very unusual configuration. Well, chances of first assumption is very low, because I always test critical packages before making them available worldwide. Also I retested Minidlna install/upgrade instructions with fresh ffp usb-stick right now. Everything went as expected without any problems, including upgrading of packages.
Restart of sshd service is required to generate new certificates and make available to connect via ssh right now in parallel, but it doesn't breaks your current connection, like it was with old openssh package. Another option instead of restart service is reboot of NAS, but in your case service not started for unknown reasons.

Grego
Posts: 18
Joined: Tue Nov 03, 2015 1:54 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by Grego » Sat Jun 03, 2017 6:00 pm

barmalej2 wrote:In that case here is first test candidate:
http://downloads.zyxel.nas-central.org/ ... -arm-1.txz
Use the following scenario to install test packages:

Code: Select all

sh /ffp/start/minidlna.sh stop
cd /ffp/funpkg/cache/br2
wget http://url/to/package.txz
funpkg -u package.txz
sh /ffp/start/minidlna.sh start
Test bookmarks/resuming.
Bookmarks OK
Not resuming

Installation error parsing

Code: Select all

tivo_discovery=bonjour
[EDIT] I understang. Error parsing because 1.2.0 to 1.1.6 ;)
D-Link DNS-320 rev A1 - MiniDLNA 1.2.0 (barmalej2)
TV Samsung UE48JU6400
TV Samsung UE32ES5500

Doky
Posts: 13
Joined: Thu Mar 20, 2014 6:28 pm

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by Doky » Sat Jun 03, 2017 6:30 pm

Use command: slapt-get -u & slapt-get --upgrade
reboot, and not ssh :/

Any package may be defective.. :/

1. NAS model: Zyxel NSA-310
2. ffp-zypkg
3. ffp-openssh, metarepository

Problem solved! My problem: Not autorun ffp-openssh.. install anyterm web ssh client, and sh /ffp/start/sshd.sh and work. :)
barmalej2 wrote:
Doky wrote: Problem: Finish install minidlna, work... and reboot nas and no sshd service.. :/
Please be so kind and provide more details:
1. Your NAS model
2. Which ffp version is used: ffp usb-stick or ffp-zypkg?
3. Which ssh service is used: ffp-openssh, zyxel firmware ssh, metarepository & dropbear? Keep in mind that several sshd services can not be used at one time.
Doky wrote: slapt-get --upgrade
command, updating openssl and openssh package... openssl and openssh bugged?!
Upgrade command does that is obvious. It upgrades all (not just openssl and openssh) installed packages to updated versions, if they are available on br2 repository.
No, of course openssl and openssh are not bugged, either way both of them will not be available. You are not the first one, who used slapt-get --upgrade, but you are first one, that reported problems with ssh daemon service after upgrading. That means something went wrong or you have very unusual configuration. Well, chances of first assumption is very low, because I always test critical packages before making them available worldwide. Also I retested Minidlna install/upgrade instructions with fresh ffp usb-stick right now. Everything went as expected without any problems, including upgrading of packages.
Restart of sshd service is required to generate new certificates and make available to connect via ssh right now in parallel, but it doesn't breaks your current connection, like it was with old openssh package. Another option instead of restart service is reboot of NAS, but in your case service not started for unknown reasons.

User avatar
MrDini
Posts: 651
Joined: Mon Dec 21, 2015 7:21 pm
Contact:

Re: HOWTO: Install/Upgrade MiniDLNA on FFP 0.7-arm

Post by MrDini » Sat Jun 03, 2017 7:23 pm

Hi,

Please give us the output of the

Code: Select all

ls -la /ffp/start/sshd.sh
command, and after that, make the sshd.sh executable:

Code: Select all

chmod +x /ffp/start/sshd.sh
Thanks nas-central the lot of help! :)

Post Reply