General NAS-Central Forums

Welcome to the NAS community
It is currently Tue Mar 28, 2017 11:34 pm

All times are UTC




Post new topic Reply to topic  [ 113 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8
Author Message
PostPosted: Fri Mar 10, 2017 2:04 pm 
Offline

Joined: Tue Oct 08, 2013 12:51 am
Posts: 88
The easiest way to restart everything is just to re-run the script from the command line.

cd /opt/etc/init.d sh -x S80NZBautomator start

To ensure a restart at boot, follow this step from the beginning of the thread...

Step 4. Place Autonzb.conf into /opt/etc chmod a+x /opt/etc/init.d/S80NZBautomator


Top
 Profile  
 
PostPosted: Mon Mar 13, 2017 3:28 pm 
Offline

Joined: Tue Oct 08, 2013 12:51 am
Posts: 88
OK...time to look for help again...

Everything was running along nicely for months, then I was getting short of disk space and deleted a number of TV series through SickRage.

Ever since, I can't get SickRage to run.

I only use SickRage and NZBGet. NZBGet starts and runs fine.

Here's the output of the script when I run it manually:

-----------------------------------------------------------------------------------------------------------------------------------------------

/ # cd /opt/etc/init.d
/usr/local/zy-pkgs/opt/etc/init.d # sh S80NZBautomator start
S80NZBautomator: line 102: git: not found
S80NZBautomator: line 148: git: not found
SABnzbd not Installed
Checking nzbget... alive.
Shutting down nzbget... done.
Starting nzbget... done.
Couchpotato not Installed
sh: you need to specify whom to kill
Waiting for SickRage to shut down: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, Tired of waiting, killing SickRage now sh: you need to specify whom to kill
46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, ^C
/usr/local/zy-pkgs/opt/etc/init.d #

-------------------------------------------------------------------------------------------------------------------------------------------------

The first thing I see is that GIT is missing. For the life of me, I can't remember how to re-install it.

Secondly, the script is trying to kill SickRage, but I don't believe it's running.

--------------------------------------------------------------------------------------------

/usr/local/zy-pkgs/opt/etc/init.d # pgrep -f nzb
24084
/usr/local/zy-pkgs/opt/etc/init.d # pgrep -f sick
/usr/local/zy-pkgs/opt/etc/init.d #

----------------------------------------------------------------------------------------------------------------

OK great gurus...where now?


Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 9:14 pm 
Offline

Joined: Tue Oct 08, 2013 12:51 am
Posts: 88
Anybody out there?

I'm getting errors when I try to install git with opkg.

Where now?


Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 9:16 pm 
Offline

Joined: Sat Sep 24, 2016 2:22 pm
Posts: 22
pitcritter wrote:
Anybody out there?

I'm getting errors when I try to install git with opkg.

Where now?


I'm not guru enough to help you unfortunately. I would just start over if I were you honestly (I did when my install was too messed up to recover).


Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 9:20 pm 
Offline

Joined: Tue Oct 08, 2013 12:51 am
Posts: 88
I'm fine with that but even the hard reset doesn't seem to help me.

I'm pushing the reset on the back of the box for an additional 5 seconds after the second beep then I hear three beeps, but it doesn't give me a full factory reset.

Is there a step I'm missing?


Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 10:57 pm 
Offline

Joined: Tue Oct 08, 2013 12:51 am
Posts: 88
Here's what I'm looking at after a reset...

--------------------------------------------------------------------------------------------------------


NSA325 login: admin
Password:


BusyBox v1.17.2 (2016-05-02 16:34:38 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ opkg update
-sh: opkg: not found
~ $

--------------------------------------------------------------------------------------------------------

Any help?


Top
 Profile  
 
PostPosted: Sun Mar 26, 2017 8:09 am 
Offline

Joined: Sun Feb 17, 2013 10:00 pm
Posts: 300
pitcritter wrote:
Here's what I'm looking at after a reset...

--------------------------------------------------------------------------------------------------------


NSA325 login: admin
Password:


BusyBox v1.17.2 (2016-05-02 16:34:38 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ opkg update
-sh: opkg: not found
~ $

--------------------------------------------------------------------------------------------------------

Any help?


So... firstly not dead... For whatever reason i stopped getting email alerts that posts were being made.

Ok go to firmware/package in the web admin for the NAS and under the package tab ensure Entware-ng is enabled, usually a factory reset of the NAS will disable it., that should sort your opkg error.

Quote:
Tired of waiting, killing SickRage now sh: you need to specify whom to kill

As you say Sickrage is not running. all i can think of for that is that when you made all the changes to the database it got corrupt. the only thing i am aware of for this is to delete the database and start again. /opt/usr/etc/config/sickbeard/sickbeard.db.

There might be a backup if you are lucky!

Git can be installed using opkg
Code:
opkg install git


Top
 Profile  
 
PostPosted: Sun Mar 26, 2017 1:35 pm 
Offline

Joined: Tue Oct 08, 2013 12:51 am
Posts: 88
Welcome back Burbulence :) we missed you.

Thanks for the reply, but it looks like my problem is a little deeper than I originally suspected.

I'm finding it difficult to re-install Entware after my reset(s).

I've posted for Mitjzelf on the Entware thread. We'll see where that goes.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 113 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8

All times are UTC


Who is online

Users browsing this forum: Bing [Bot] and 31 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group