General NAS-Central Forums

Welcome to the NAS community
It is currently Wed Aug 23, 2017 9:24 pm

All times are UTC




Post new topic Reply to topic  [ 132 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9  Next
Author Message
PostPosted: Mon Nov 14, 2016 2:15 pm 
Offline

Joined: Sun Feb 17, 2013 10:00 pm
Posts: 307
Haha yeah that would do it!!

As for the Par buffer, it might help, give it a try... but from what i can see from mine it is after the par repair and during unpacking, but it'll be something like that.


Top
 Profile  
 
PostPosted: Mon Nov 14, 2016 2:16 pm 
Offline

Joined: Sat Sep 24, 2016 2:22 pm
Posts: 25
burbulence wrote:
Haha yeah that would do it!!

As for the Par buffer, it might help, give it a try... but from what i can see from mine it is after the par repair and during unpacking, but it'll be something like that.


:D

Please share if you find a solution :)


Top
 Profile  
 
PostPosted: Tue Nov 15, 2016 7:45 am 
Offline

Joined: Sat Sep 24, 2016 2:22 pm
Posts: 25
Par buffer change to 32MB had no effect... Any way to at least make NZBGet restart automatically after it crashes? Run it as daemon or something?
Or any way to downgrade NZBGet?


Top
 Profile  
 
PostPosted: Wed Jan 11, 2017 3:59 pm 
Offline

Joined: Mon Dec 28, 2015 10:01 pm
Posts: 2
hi,

for some reason nzbget and sabnzbd won't install because /opt/share/sabnzbd cannot found

here is the output:

root@NAS:/opt/etc/init.d# sh -x S80NZBautomator
+ . /opt/etc/autonzb.conf
++ SABnzbd=1
++ Nzbget=1
++ CouchPotato=1
++ SickRage=1
++ Headphones=0
++ Mylar=0
++ NzbtoMedia=1
++ packageupdate=0
++ init=/opt/etc/init.d
++ useradmin=/i-data/md0/admin
++ configdir=/opt/usr/etc/config
++ share=/opt/share
++ sabconfig=/opt/usr/etc/config/sabnzbd
++ nzbgetconfig=/opt/usr/etc/config/nzbget
++ couchconfig=/opt/usr/etc/config/couchpotato
++ sickconfig=/opt/usr/etc/config/sickbeard
++ headconfig=/opt/usr/etc/config/headphones
++ mylarconfig=/opt/usr/etc/config/mylar
++ nzbtomedia=/opt/usr/etc/config/nzbToMedia
++ python=/opt/bin/python2
++ sabdata=/opt/share/sabnzbd
++ couchdata=/opt/share/couchpotato
++ sickdata=/opt/share/SickRage
++ headdata=/opt/share/headphones
++ mylardata=/opt/share/mylar
++ SABPKG_NAME=SABnzbd
++ SABPKG_DIR=/opt/share/couchpotato
++ SABCONFIG_DIR=/opt/usr/etc/config/couchpotato
++ SABPID_FILE=/opt/usr/etc/config/couchpotato/SABnzbd.pid
++ NPKG_NAME=nzbget
++ NCONFIG_DIR=/opt/usr/etc/config/nzbget
++ NPID_FILE=/opt/usr/etc/config/nzbget/nzbget.lock
++ CPKG_NAME=CouchPotato
++ CPKG_DIR=/opt/share/couchpotato
++ CCONFIG_DIR=/opt/usr/etc/config/couchpotato
++ CPID_FILE=/opt/usr/etc/config/couchpotato/CouchPotato.pid
++ SPKG_NAME=SickRage
++ SPKG_DIR=/opt/share/SickRage
++ SCONFIG_DIR=/opt/usr/etc/config/sickbeard
++ SPID_FILE=/opt/usr/etc/config/sickbeard/SickRage.pid
++ HPKG_NAME=Headphones
++ HPKG_DIR=/opt/share/headphones
++ HCONFIG_DIR=/opt/usr/etc/config/headphones
++ HPID_FILE=/opt/usr/etc/config/headphones/Headphones.pid
++ MPKG_NAME=Mylar
++ MPKG_DIR=/opt/share/mylar
++ MCONFIG_DIR=/opt/usr/etc/config/mylar
++ MPID_FILE=/opt/usr/etc/config/mylar/Mylar.pid
+ '[' 0 == 1 ']'
+ cd /i-data/md0/admin
+ '[' '!' -d /i-data/md0/admin/download/incomplete ']'
+ '[' 1 == 1 ']'
+ '[' '!' -f /opt/bin/nzbget ']'
+ '[' 0 == 1 ']'
+ '[' 1 == 1 ']'
+ '[' -f /opt/share/sabnzbd/SABnzbd.py ']'
+ git clone https://github.com/sabnzbd/sabnzbd -b master /opt/share/sabnzbd
Cloning into '/opt/share/sabnzbd'...
/usr/local/zy-pkgs/ffproot/ffp/libexec/git-core/git-remote-https: can't resolve symbol 'SSL_CTX_set_next_proto_select_cb'
+ mkdir -p -m 777 /opt/usr/etc/config/sabnzbd
+ mkdir -p -m 777 /opt/usr/etc/config/sabnzbd
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -d /opt/share/couchpotato ']'
+ cd /opt/share/couchpotato
+ git pull https://github.com/RuudBurger/CouchPotatoServer
/usr/local/zy-pkgs/ffproot/ffp/libexec/git-core/git-remote-https: can't resolve symbol 'SSL_CTX_set_next_proto_select_cb'
+ '[' 1 == 1 ']'
+ '[' -d /opt/share/SickRage ']'
+ cd /opt/share/SickRage
+ git pull https://github.com/SickRage/SickRage.git
/usr/local/zy-pkgs/ffproot/ffp/libexec/git-core/git-remote-https: can't resolve symbol 'SSL_CTX_set_next_proto_select_cb'
+ '[' 0 == 1 ']'
+ '[' 0 == 1 ']'
+ '[' 1 == 1 ']'
+ '[' -d /opt/usr/etc/config/nzbToMedia ']'
+ cd /opt/usr/etc/config/nzbToMedia
+ git pull https://github.com/clinton-hall/nzbToMedia.git
/usr/local/zy-pkgs/ffproot/ffp/libexec/git-core/git-remote-https: can't resolve symbol 'SSL_CTX_set_next_proto_select_cb'
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/couchpotato/SABnzbd.pid ']'
+ sleep 2
+ '[' -f /opt/usr/etc/config/sabnzbd/sabnzbd.ini ']'
+ PYTHON_EGG_CACHE=/tmp
+ /opt/bin/python2 /opt/share/sabnzbd/SABnzbd.py -b 0 -d --pidfile SABPID_FILE -f sabconfig/sabnzbd.ini
/opt/bin/python2: can't open file '/opt/share/sabnzbd/SABnzbd.py': [Errno 2] No such file or directory
+ '[' 1 == 1 ']'
+ sh /opt/etc/init.d/S75nzbget stop
Checking nzbget... dead.
+ sleep 2
+ '[' 0 == 1 ']'
+ sleep 2
+ sh /opt/etc/init.d/S75nzbget start
Starting nzbget... failed.
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/couchpotato/CouchPotato.pid ']'
++ /bin/cat /opt/usr/etc/config/couchpotato/CouchPotato.pid
+ Pid=2433
+ i=0
+ kill 2433
+ echo -n ' Waiting for CouchPotato to shut down: '
Waiting for CouchPotato to shut down: + '[' -d /proc/2433 ']'
+ sleep 1
+ let i+=1
+ /bin/echo -n '1, '
1, + '[' 1 = 45 ']'
+ '[' -d /proc/2433 ']'
+ rm -f /opt/usr/etc/config/couchpotato/CouchPotato.pid
+ echo ' CouchPotato Shutdown '
CouchPotato Shutdown
+ sleep 2
+ /opt/bin/python2 /opt/share/couchpotato/CouchPotato.py --daemon --data_dir /opt/usr/etc/config/couchpotato --config /opt/usr/etc/config/couchpotato/settings.conf --pid_file /opt/usr/etc/config/couchpotato/CouchPotato.pid
+ echo -n ' CouchPotato Started '
CouchPotato Started + sleep 2
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/sickbeard/SickRage.pid ']'
++ /bin/cat /opt/usr/etc/config/sickbeard/SickRage.pid
+ Pid=2592
+ i=0
+ kill 2592
+ echo -n ' Waiting for SickRage to shut down: '
Waiting for SickRage to shut down: + '[' -d /proc/2592 ']'
+ sleep 1
+ let i+=1
+ /bin/echo -n '1, '
1, + '[' 1 = 45 ']'
+ '[' -d /proc/2592 ']'
+ sleep 1
+ let i+=1
+ /bin/echo -n '2, '
2, + '[' 2 = 45 ']'
+ '[' -d /proc/2592 ']'
+ sleep 1
+ let i+=1
+ /bin/echo -n '3, '
3, + '[' 3 = 45 ']'
+ '[' -d /proc/2592 ']'
+ sleep 1
+ let i+=1
+ /bin/echo -n '4, '
4, + '[' 4 = 45 ']'
+ '[' -d /proc/2592 ']'
+ rm -f /opt/usr/etc/config/sickbeard/SickRage.pid
+ echo ' SickRage Shutdown '
SickRage Shutdown
+ sleep 2
+ /opt/bin/python2 /opt/share/SickRage/SickBeard.py --datadir /opt/usr/etc/config/sickbeard --config /opt/usr/etc/config/sickbeard/config.ini -d --pidfile /opt/usr/etc/config/sickbeard/SickRage.pid
+ echo -n ' SickRage Started '
SickRage Started + sleep 2
+ '[' 0 == 1 ']'
+ echo ' Headphones not Installed '
Headphones not Installed
+ sleep 2
+ '[' 0 == 1 ']'
+ echo 'Mylar not Installed'
Mylar not Installed
root@NAS:/opt/etc/init.d#


the directorys are there? :

root@NAS:/opt/share# ls
SickRage aclocal-1.15 automake-1.15 git-core perl
aclocal autoconf couchpotato nzbget terminfo
root@NAS:/opt/share#


can anyone help me what to do?

Thanks.


Top
 Profile  
 
PostPosted: Sat Jan 14, 2017 9:03 pm 
Offline

Joined: Sat Sep 24, 2016 2:22 pm
Posts: 25
kramiz1 wrote:
Par buffer change to 32MB had no effect... Any way to at least make NZBGet restart automatically after it crashes? Run it as daemon or something?
Or any way to downgrade NZBGet?


Wow I got it working somehow shortly after (don't ask me how, I have no idea). Then of course I was stupid and upgraded all opkg packages on the NAS today and after that it crashes again... :(


Top
 Profile  
 
PostPosted: Sat Jan 14, 2017 11:01 pm 
Offline

Joined: Sat Sep 24, 2016 2:22 pm
Posts: 25
kramiz1 wrote:
kramiz1 wrote:
Par buffer change to 32MB had no effect... Any way to at least make NZBGet restart automatically after it crashes? Run it as daemon or something?
Or any way to downgrade NZBGet?


Wow I got it working somehow shortly after (don't ask me how, I have no idea). Then of course I was stupid and upgraded all opkg packages on the NAS today and after that it crashes again... :(


Ended up just creating a cronjob that restarts nzbget if it crashes. Not the ideal fix but it will hopefully do for now...


Top
 Profile  
 
PostPosted: Wed Jan 18, 2017 7:18 pm 
Offline

Joined: Sat Jun 01, 2013 9:39 am
Posts: 16
Can anyone point me in the right direction to why this is not installing properly?

+ . /opt/etc/autonzb.conf
++ SABnzbd=1
++ Nzbget=1
++ CouchPotato=1
++ SickRage=1
++ Headphones=0
++ Mylar=0
++ NzbtoMedia=1
++ packageupdate=0
++ init=/opt/etc/init.d
++ useradmin=/i-data/md0/admin
++ configdir=/opt/usr/etc/config
++ share=/opt/share
++ sabconfig=/opt/usr/etc/config/sabnzbd
++ nzbgetconfig=/opt/usr/etc/config/nzbget
++ couchconfig=/opt/usr/etc/config/couchpotato
++ sickconfig=/opt/usr/etc/config/sickbeard
++ headconfig=/opt/usr/etc/config/headphones
++ mylarconfig=/opt/usr/etc/config/mylar
++ nzbtomedia=/opt/usr/etc/config/nzbToMedia
++ python=/opt/bin/python2
++ sabdata=/opt/share/sabnzbd
++ couchdata=/opt/share/couchpotato
++ sickdata=/opt/share/SickRage
++ headdata=/opt/share/headphones
++ mylardata=/opt/share/mylar
++ SABPKG_NAME=SABnzbd
++ SABPKG_DIR=/opt/share/couchpotato
++ SABCONFIG_DIR=/opt/usr/etc/config/couchpotato
++ SABPID_FILE=/opt/usr/etc/config/couchpotato/SABnzbd.pid
++ NPKG_NAME=nzbget
++ NCONFIG_DIR=/opt/usr/etc/config/nzbget
++ NPID_FILE=/opt/usr/etc/config/nzbget/nzbget.lock
++ CPKG_NAME=CouchPotato
++ CPKG_DIR=/opt/share/couchpotato
++ CCONFIG_DIR=/opt/usr/etc/config/couchpotato
++ CPID_FILE=/opt/usr/etc/config/couchpotato/CouchPotato.pid
++ SPKG_NAME=SickRage
++ SPKG_DIR=/opt/share/SickRage
++ SCONFIG_DIR=/opt/usr/etc/config/sickbeard
++ SPID_FILE=/opt/usr/etc/config/sickbeard/SickRage.pid
++ HPKG_NAME=Headphones
++ HPKG_DIR=/opt/share/headphones
++ HCONFIG_DIR=/opt/usr/etc/config/headphones
++ HPID_FILE=/opt/usr/etc/config/headphones/Headphones.pid
++ MPKG_NAME=Mylar
++ MPKG_DIR=/opt/share/mylar
++ MCONFIG_DIR=/opt/usr/etc/config/mylar
++ MPID_FILE=/opt/usr/etc/config/mylar/Mylar.pid
+ '[' 0 == 1 ']'
+ cd /i-data/md0/admin
+ '[' '!' -d /i-data/md0/admin/download/incomplete ']'
+ '[' 1 == 1 ']'
+ '[' '!' -f /opt/bin/nzbget ']'
+ opkg install nzbget
S80NZBautomator: line 51: opkg: command not found
+ '[' 1 == 1 ']'
+ '[' -f /opt/share/sabnzbd/SABnzbd.py ']'
+ git clone https://github.com/sabnzbd/sabnzbd -b master /opt/share/sabnzbd
S80NZBautomator: line 67: git: command not found
+ mkdir -p -m 777 /opt/usr/etc/config/sabnzbd
+ mkdir -p -m 777 /opt/usr/etc/config/sabnzbd
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -d /opt/share/couchpotato ']'
+ git clone https://github.com/RuudBurger/CouchPotatoServer /opt/share/couchpotato
S80NZBautomator: line 83: git: command not found
+ mkdir -p -m 777 /opt/usr/etc/config/couchpotato
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -d /opt/share/SickRage ']'
+ git clone https://github.com/SickRage/SickRage.git /opt/share/SickRage
S80NZBautomator: line 98: git: command not found
+ mkdir -p -m 777 /opt/usr/etc/config/sickbeard
+ sleep 2
+ '[' 0 == 1 ']'
+ '[' 0 == 1 ']'
+ '[' 1 == 1 ']'
+ '[' -d /opt/usr/etc/config/nzbToMedia ']'
+ git clone https://github.com/clinton-hall/nzbToMedia.git /opt/usr/etc/config/nzbToMedia
S80NZBautomator: line 145: git: command not found
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/couchpotato/SABnzbd.pid ']'
+ sleep 2
+ '[' -f /opt/usr/etc/config/sabnzbd/sabnzbd.ini ']'
+ PYTHON_EGG_CACHE=/tmp
+ /opt/bin/python2 /opt/share/sabnzbd/SABnzbd.py -b 0 -d -s 0.0.0.0:8085 --pidfile SABPID_FILE -f /opt/usr/etc/config/sabnzbd/sabnzbd.ini
S80NZBautomator: line 181: /opt/bin/python2: No such file or directory
+ sleep 2
+ '[' 1 == 1 ']'
+ sh /opt/etc/init.d/S75nzbget stop
sh: /opt/etc/init.d/S75nzbget: No such file or directory
+ sleep 2
+ '[' 0 == 1 ']'
+ sleep 2
+ sh /opt/etc/init.d/S75nzbget start
sh: /opt/etc/init.d/S75nzbget: No such file or directory
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/couchpotato/CouchPotato.pid ']'
+ sleep 2
+ /opt/bin/python2 /opt/share/couchpotato/CouchPotato.py --daemon --data_dir /opt/usr/etc/config/couchpotato --config /opt/usr/etc/config/couchpotato/settings.conf --pid_file /opt/usr/etc/config/couchpotato/CouchPotato.pid
S80NZBautomator: line 233: /opt/bin/python2: No such file or directory
+ echo -n ' CouchPotato Started '
CouchPotato Started + sleep 2
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/sickbeard/SickRage.pid ']'
+ sleep 2
+ /opt/bin/python2 /opt/share/SickRage/SickBeard.py --datadir /opt/usr/etc/config/sickbeard --config /opt/usr/etc/config/sickbeard/config.ini -d --pidfile /opt/usr/etc/config/sickbeard/SickRage.pid
S80NZBautomator: line 268: /opt/bin/python2: No such file or directory
+ echo -n ' SickRage Started '
SickRage Started + sleep 2
+ '[' 0 == 1 ']'
+ echo ' Headphones not Installed '
Headphones not Installed
+ sleep 2
+ '[' 0 == 1 ']'
+ echo 'Mylar not Installed'
Mylar not Installed
root@Mediaserver2:/opt/etc/init.d# sh -x S80NZBautomator start
+ . /opt/etc/autonzb.conf
++ SABnzbd=1
++ Nzbget=1
++ CouchPotato=1
++ SickRage=1
++ Headphones=0
++ Mylar=0
++ NzbtoMedia=1
++ packageupdate=0
++ init=/opt/etc/init.d
++ useradmin=/i-data/md0/admin
++ configdir=/opt/usr/etc/config
++ share=/opt/share
++ sabconfig=/opt/usr/etc/config/sabnzbd
++ nzbgetconfig=/opt/usr/etc/config/nzbget
++ couchconfig=/opt/usr/etc/config/couchpotato
++ sickconfig=/opt/usr/etc/config/sickbeard
++ headconfig=/opt/usr/etc/config/headphones
++ mylarconfig=/opt/usr/etc/config/mylar
++ nzbtomedia=/opt/usr/etc/config/nzbToMedia
++ python=/opt/bin/python2
++ sabdata=/opt/share/sabnzbd
++ couchdata=/opt/share/couchpotato
++ sickdata=/opt/share/SickRage
++ headdata=/opt/share/headphones
++ mylardata=/opt/share/mylar
++ SABPKG_NAME=SABnzbd
++ SABPKG_DIR=/opt/share/couchpotato
++ SABCONFIG_DIR=/opt/usr/etc/config/couchpotato
++ SABPID_FILE=/opt/usr/etc/config/couchpotato/SABnzbd.pid
++ NPKG_NAME=nzbget
++ NCONFIG_DIR=/opt/usr/etc/config/nzbget
++ NPID_FILE=/opt/usr/etc/config/nzbget/nzbget.lock
++ CPKG_NAME=CouchPotato
++ CPKG_DIR=/opt/share/couchpotato
++ CCONFIG_DIR=/opt/usr/etc/config/couchpotato
++ CPID_FILE=/opt/usr/etc/config/couchpotato/CouchPotato.pid
++ SPKG_NAME=SickRage
++ SPKG_DIR=/opt/share/SickRage
++ SCONFIG_DIR=/opt/usr/etc/config/sickbeard
++ SPID_FILE=/opt/usr/etc/config/sickbeard/SickRage.pid
++ HPKG_NAME=Headphones
++ HPKG_DIR=/opt/share/headphones
++ HCONFIG_DIR=/opt/usr/etc/config/headphones
++ HPID_FILE=/opt/usr/etc/config/headphones/Headphones.pid
++ MPKG_NAME=Mylar
++ MPKG_DIR=/opt/share/mylar
++ MCONFIG_DIR=/opt/usr/etc/config/mylar
++ MPID_FILE=/opt/usr/etc/config/mylar/Mylar.pid
+ '[' 0 == 1 ']'
+ cd /i-data/md0/admin
+ '[' '!' -d /i-data/md0/admin/download/incomplete ']'
+ '[' 1 == 1 ']'
+ '[' '!' -f /opt/bin/nzbget ']'
+ opkg install nzbget
S80NZBautomator: line 51: opkg: command not found
+ '[' 1 == 1 ']'
+ '[' -f /opt/share/sabnzbd/SABnzbd.py ']'
+ git clone https://github.com/sabnzbd/sabnzbd -b master /opt/share/sabnzbd
S80NZBautomator: line 67: git: command not found
+ mkdir -p -m 777 /opt/usr/etc/config/sabnzbd
+ mkdir -p -m 777 /opt/usr/etc/config/sabnzbd
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -d /opt/share/couchpotato ']'
+ git clone https://github.com/RuudBurger/CouchPotatoServer /opt/share/couchpotato
S80NZBautomator: line 83: git: command not found
+ mkdir -p -m 777 /opt/usr/etc/config/couchpotato
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -d /opt/share/SickRage ']'
+ git clone https://github.com/SickRage/SickRage.git /opt/share/SickRage
S80NZBautomator: line 98: git: command not found
+ mkdir -p -m 777 /opt/usr/etc/config/sickbeard
+ sleep 2
+ '[' 0 == 1 ']'
+ '[' 0 == 1 ']'
+ '[' 1 == 1 ']'
+ '[' -d /opt/usr/etc/config/nzbToMedia ']'
+ git clone https://github.com/clinton-hall/nzbToMedia.git /opt/usr/etc/config/nzbToMedia
S80NZBautomator: line 145: git: command not found
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/couchpotato/SABnzbd.pid ']'
+ sleep 2
+ '[' -f /opt/usr/etc/config/sabnzbd/sabnzbd.ini ']'
+ PYTHON_EGG_CACHE=/tmp
+ /opt/bin/python2 /opt/share/sabnzbd/SABnzbd.py -b 0 -d -s 0.0.0.0:8085 --pidfile SABPID_FILE -f /opt/usr/etc/config/sabnzbd/sabnzbd.ini
S80NZBautomator: line 181: /opt/bin/python2: No such file or directory
+ sleep 2
+ '[' 1 == 1 ']'
+ sh /opt/etc/init.d/S75nzbget stop
sh: /opt/etc/init.d/S75nzbget: No such file or directory
+ sleep 2
+ '[' 0 == 1 ']'
+ sleep 2
+ sh /opt/etc/init.d/S75nzbget start
sh: /opt/etc/init.d/S75nzbget: No such file or directory
+ sleep 2
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/couchpotato/CouchPotato.pid ']'
+ sleep 2
+ /opt/bin/python2 /opt/share/couchpotato/CouchPotato.py --daemon --data_dir /opt/usr/etc/config/couchpotato --config /opt/usr/etc/config/couchpotato/settings.conf --pid_file /opt/usr/etc/config/couchpotato/CouchPotato.pid
S80NZBautomator: line 233: /opt/bin/python2: No such file or directory
+ echo -n ' CouchPotato Started '
CouchPotato Started + sleep 2
+ '[' 1 == 1 ']'
+ '[' -f /opt/usr/etc/config/sickbeard/SickRage.pid ']'
+ sleep 2
+ /opt/bin/python2 /opt/share/SickRage/SickBeard.py --datadir /opt/usr/etc/config/sickbeard --config /opt/usr/etc/config/sickbeard/config.ini -d --pidfile /opt/usr/etc/config/sickbeard/SickRage.pid
S80NZBautomator: line 268: /opt/bin/python2: No such file or directory
+ echo -n ' SickRage Started '
SickRage Started + sleep 2
+ '[' 0 == 1 ']'
+ echo ' Headphones not Installed '
Headphones not Installed
+ sleep 2
+ '[' 0 == 1 ']'
+ echo 'Mylar not Installed'
Mylar not Installed


Top
 Profile  
 
PostPosted: Wed Jan 18, 2017 7:43 pm 
Offline

Joined: Sat Sep 24, 2016 2:22 pm
Posts: 25
ajg007 wrote:
Can anyone point me in the right direction to why this is not installing properly?

...


Doesn't look like you entware / opkg installed?


Last edited by kramiz1 on Mon Jan 23, 2017 10:08 pm, edited 2 times in total.

Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 8:55 pm 
Offline

Joined: Sat Jun 01, 2013 9:39 am
Posts: 16
kramiz1 wrote:

Doesn't look like you entware / open installed?


Thanks I have it running now.

Are these errors normal?

24/01/2017 04:36 par2 binary... NOT found!
WARNING 24/01/2017 04:36 _yenc module... NOT found!

thanks


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 10:06 pm 
Offline

Joined: Sat Sep 24, 2016 2:22 pm
Posts: 25
ajg007 wrote:
kramiz1 wrote:

Doesn't look like you entware / open installed?


Thanks I have it running now.

Are these errors normal?

24/01/2017 04:36 par2 binary... NOT found!
WARNING 24/01/2017 04:36 _yenc module... NOT found!

thanks


Try installing par2 with opkg


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 10:42 pm 
Offline

Joined: Sat Jun 01, 2013 9:39 am
Posts: 16
kramiz1 wrote:
ajg007 wrote:
kramiz1 wrote:

Doesn't look like you entware / open installed?


Thanks I have it running now.

Are these errors normal?

24/01/2017 04:36 par2 binary... NOT found!
WARNING 24/01/2017 04:36 _yenc module... NOT found!

thanks


Try installing par2 with opkg



Thanks for your help :-) sorted that Now my next issue lol


i keep getting a config error with nzbget.

Please edit your configuration file (/opt/share/nzbget/nzbget.conf) in a text editor and set the option ConfigTemplate to point to the template configuration file nzbget.conf.

I've tried editing it like it says and no dice, I've then put where my ftp program says the config file is which is /usr/local/zy-pkgs/opt/share/nzbget and still it does not like it!


Edit: seems to be working now thanks


Top
 Profile  
 
PostPosted: Fri Jan 27, 2017 9:16 pm 
Offline

Joined: Sat Jun 01, 2013 9:39 am
Posts: 16
Sorry Guys. I know I'm useless!

I'm trying out sabnzbd and when i try to install Yenc using this command

Code:
pip install http://www.golug.it/pub/yenc/yenc-0.4.0.tar.gz


I get these errors:

Code:
Command "/opt/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/usr/local/zy-pkgs/opt/tmp/pip-zAKqIo-build/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /opt/tmp/pip-480Q7Z-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /usr/local/zy-pkgs/opt/tmp/pip-zAKqIo-build/



any help would be great!


Top
 Profile  
 
PostPosted: Fri Jan 27, 2017 11:08 pm 
Offline

Joined: Sat Sep 24, 2016 2:22 pm
Posts: 25
ajg007 wrote:
Sorry Guys. I know I'm useless!

I'm trying out sabnzbd and when i try to install Yenc using this command

Code:
pip install http://www.golug.it/pub/yenc/yenc-0.4.0.tar.gz


I get these errors:

Code:
Command "/opt/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/usr/local/zy-pkgs/opt/tmp/pip-zAKqIo-build/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /opt/tmp/pip-480Q7Z-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /usr/local/zy-pkgs/opt/tmp/pip-zAKqIo-build/



any help would be great!


That seems to be a very generic error so I don't know how to help you unfortunately... Other than; try installing it with opkg instead if it's available there? (Can't look for myself right now).


Top
 Profile  
 
PostPosted: Sat Jan 28, 2017 9:59 am 
Offline

Joined: Sat Jun 01, 2013 9:39 am
Posts: 16
kramiz1 wrote:
ajg007 wrote:
Sorry Guys. I know I'm useless!

I'm trying out sabnzbd and when i try to install Yenc using this command

Code:
pip install http://www.golug.it/pub/yenc/yenc-0.4.0.tar.gz


I get these errors:

Code:
Command "/opt/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/usr/local/zy-pkgs/opt/tmp/pip-zAKqIo-build/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /opt/tmp/pip-480Q7Z-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /usr/local/zy-pkgs/opt/tmp/pip-zAKqIo-build/



any help would be great!


That seems to be a very generic error so I don't know how to help you unfortunately... Other than; try installing it with opkg instead if it's available there? (Can't look for myself right now).



its ok. found the solution.

opkg install python-dev --force-overwrite

then

pip install http://www.golug.it/pub/yenc/yenc-0.4.0.tar.gz


then i get:

Installing collected packages: yenc
Running setup.py install for yenc ... done
Successfully installed yenc-0.4.0


woohoo


Top
 Profile  
 
PostPosted: Thu Feb 02, 2017 9:20 pm 
Offline

Joined: Sat Jun 01, 2013 9:39 am
Posts: 16
Seems my sabnzbd seems to stop if the NAS is shutdown.

How can I restart it and how can i make it auto start on boot?


Can someone kindly take a look to see if its an install issue that causes sabnzbd not to autosrat after boot?

~ # cd /usr/local/zy-pkgs/opt/etc/init.d
/usr/local/zy-pkgs/opt/etc/init.d # chmod a+x /usr/local/zy-pkgs/opt/etc/init.d/S80NZBautomator
/usr/local/zy-pkgs/opt/etc/init.d # sh -x S80NZBautomator start
+ . /opt/etc/autonzb.conf
+ SABnzbd=1
+ Nzbget=0
+ CouchPotato=0
+ SickRage=0
+ Headphones=0
+ Mylar=0
+ NzbtoMedia=0
+ packageupdate=0
+ init=/opt/etc/init.d
+ useradmin=/i-data/md0/admin
+ configdir=/opt/usr/etc/config
+ share=/opt/share
+ sabconfig=/opt/usr/etc/config/sabnzbd
+ nzbgetconfig=/opt/usr/etc/config/nzbget
+ couchconfig=/opt/usr/etc/config/couchpotato
+ sickconfig=/opt/usr/etc/config/sickbeard
+ headconfig=/opt/usr/etc/config/headphones
+ mylarconfig=/opt/usr/etc/config/mylar
+ nzbtomedia=/opt/usr/etc/config/nzbToMedia
+ python=/opt/bin/python2
+ sabdata=/opt/share/sabnzbd
+ couchdata=/opt/share/couchpotato
+ sickdata=/opt/share/SickRage
+ headdata=/opt/share/headphones
+ mylardata=/opt/share/mylar
+ SABPKG_NAME=SABnzbd
+ SABPKG_DIR=/opt/share/couchpotato
+ SABCONFIG_DIR=/opt/usr/etc/config/couchpotato
+ SABPID_FILE=/opt/usr/etc/config/couchpotato/SABnzbd.pid
+ NPKG_NAME=nzbget
+ NCONFIG_DIR=/opt/usr/etc/config/nzbget
+ NPID_FILE=/opt/usr/etc/config/nzbget/nzbget.lock
+ CPKG_NAME=CouchPotato
+ CPKG_DIR=/opt/share/couchpotato
+ CCONFIG_DIR=/opt/usr/etc/config/couchpotato
+ CPID_FILE=/opt/usr/etc/config/couchpotato/CouchPotato.pid
+ SPKG_NAME=SickRage
+ SPKG_DIR=/opt/share/SickRage
+ SCONFIG_DIR=/opt/usr/etc/config/sickbeard
+ SPID_FILE=/opt/usr/etc/config/sickbeard/SickRage.pid
+ HPKG_NAME=Headphones
+ HPKG_DIR=/opt/share/headphones
+ HCONFIG_DIR=/opt/usr/etc/config/headphones
+ HPID_FILE=/opt/usr/etc/config/headphones/Headphones.pid
+ MPKG_NAME=Mylar
+ MPKG_DIR=/opt/share/mylar
+ MCONFIG_DIR=/opt/usr/etc/config/mylar
+ MPID_FILE=/opt/usr/etc/config/mylar/Mylar.pid
+ [ 0 == 1 ]
+ cd /i-data/md0/admin
+ [ ! -d /i-data/md0/admin/download/incomplete ]
+ [ 0 == 1 ]
+ [ 0 == 1 ]
+ [ 1 == 1 ]
+ [ -f /opt/share/sabnzbd/SABnzbd.py ]
+ git clone https://github.com/sabnzbd/sabnzbd -b master /opt/share/sabnzbd
Cloning into '/opt/share/sabnzbd'...
remote: Counting objects: 47057, done.
remote: Compressing objects: 100% (157/157), done.
remote: Total 47057 (delta 96), reused 0 (delta 0), pack-reused 46900
Receiving objects: 100% (47057/47057), 98.15 MiB | 2.55 MiB/s, done.
Resolving deltas: 100% (31844/31844), done.
+ mkdir -p -m 777 /opt/usr/etc/config/sabnzbd
+ mkdir -p -m 777 /opt/usr/etc/config/sabnzbd
+ sleep 2
+ [ 0 == 1 ]
+ [ 0 == 1 ]
+ [ 0 == 1 ]
+ [ 0 == 1 ]
+ [ 0 == 1 ]
+ [ 1 == 1 ]
+ [ -f /opt/usr/etc/config/couchpotato/SABnzbd.pid ]
+ sleep 2
+ [ -f /opt/usr/etc/config/sabnzbd/sabnzbd.ini ]
+ PYTHON_EGG_CACHE=/tmp /opt/bin/python2 /opt/share/sabnzbd/SABnzbd.py -b 0 -d --pidfile $SABPID_FILE -f $sabconfig/sabnzbd.ini
+ [ 0 == 1 ]
+ sleep 2
+ [ 0 == 1 ]
+ echo Couchpotato not Installed
Couchpotato not Installed
+ sleep 2
+ [ 0 == 1 ]
+ echo SickRage not Installed
SickRage not Installed
+ sleep 2
+ [ 0 == 1 ]
+ echo Headphones not Installed
Headphones not Installed
+ sleep 2
+ [ 0 == 1 ]
+ echo Mylar not Installed
Mylar not Installed


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 132 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9  Next

All times are UTC


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], dexhain, Yahoo [Bot] and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group