Hello,
I have an nsa 320, aprox. 3 years old. After power failure it restart automatically and all the leds are lit(not blinking). sistem led is orange, hdd leds are red, usb led green and copy led is red. I disconnected from power and connected again, press the power button and the same thing it happens. Only after many (more then 10) repetitions of this procedure it starts.
I tried the usb recovery method, connect the serial cable dont see anything( or i do not make the correct procedure). it appears to be a power supply problem, or an component from the board responsible whit power supply the components.
please give me an idea. thank you.
nsa 320 start very hard
Marvell Kirkwood based
Post Reply
1 post
• Page 1 of 1
Jump to
- General
- ↳ Announcements
- ↳ Development
- ↳ General
- ↳ Kernel
- ↳ Foonas
- ↳ Everything else
- Hardware
- ↳ Lacie
- ↳ CloudBox
- ↳ d2 Network
- ↳ d2 Network 2
- ↳ EDmini
- ↳ EDmini v2
- ↳ Ethernet Big Disk
- ↳ Internet Space
- ↳ Network Space
- ↳ Network Space 2
- ↳ Network Space MAX
- ↳ Wireless Space
- ↳ 2big Network
- ↳ 2big Network 2
- ↳ 5big Network
- ↳ 5big Network 2
- ↳ Other
- ↳ Lenovo/Iomega
- ↳ EZ Media & Backup Center
- ↳ iConnect
- ↳ Home Media Network Hard Drive
- ↳ Home Media Network Hard Drive - Cloud Edition
- ↳ StorCenter ix2-200
- ↳ StorCenter ix4-200d
- ↳ StorCenter ix4-200r
- ↳ StorCenter ix4-300d
- ↳ Other
- ↳ Zyxel
- ↳ NSA210
- ↳ NSA-220/NSA-220 Plus
- ↳ NSA221
- ↳ NSA-2400/NSA-2401
- ↳ NSA-310/320/325
- ↳ NAS520/540/542
- ↳ Other
- ↳ Other Manufacturers
- ↳ Belkin
- ↳ Data Robotics Inc
- ↳ LG
- ↳ Medion
- ↳ Netgear
- ↳ Plextor
- ↳ Sitecom
- ↳ Shuttle
- ↳ Thecus
- ↳ Xtreamer
- ↳ Other
- Foreign
- ↳ German