NSA325 Power Control Schedule stop working

Marvell Kirkwood based
Post Reply
artattack
Posts: 2
Joined: Sun Mar 26, 2017 7:37 pm

NSA325 Power Control Schedule stop working

Post by artattack » Sun Mar 26, 2017 7:42 pm

NSA325 the scheduled start up function has stopped working. The shutdown function works reliably and the start up did until perhaps some weeks ago.

I'm using 4.80 firmware.

I have attempted to reset the settings re-entering them from web administration UI.

How can i do to solve the issue?

Mijzelf
Posts: 6207
Joined: Mon Jun 16, 2008 10:45 am

Re: NSA325 Power Control Schedule stop working

Post by Mijzelf » Sun Mar 26, 2017 8:27 pm

First try a factory reset. If that doesn't help the only action I can think of is to exchange the battery. There is a CR 2032 battery on the PCB (Picture) which is for the internal clock.

The powerup function is AFAIK performed by some dedicated microcontroller. Don't know, maybe it can't function without a battery.

normsland
Posts: 69
Joined: Sun Mar 31, 2013 10:07 am

Re: NSA325 Power Control Schedule stop working

Post by normsland » Tue Mar 28, 2017 3:45 am

I would try deleting all of your power schedule. Clear it completely. Then re-input the schedule. Power scheduler has always been a bit flakey. Could be the change of clocks to summertime. I'm not sure. It now works for me :)

artattack
Posts: 2
Joined: Sun Mar 26, 2017 7:37 pm

Re: NSA325 Power Control Schedule stop working

Post by artattack » Fri Mar 31, 2017 1:17 pm

Thanks all for the support.

CR 2032 battery replacement on the PCB has resolved the issue.

Thank you very much!!!

Post Reply