General NAS-Central Forums

Welcome to the NAS community
It is currently Mon Feb 19, 2018 4:19 pm

All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Mon Feb 12, 2018 7:37 pm 
Offline

Joined: Sun Feb 05, 2017 12:55 pm
Posts: 24
Hi,

I have been using my nas for a while just as a storage system and to do some torrent downloading. Also I have been experimenting with using domoticz icm with a P1 cable to read out my electricity and gas meter. This last project kinda failed because I could not get any readings.

Recently I got my hands on a Z wave USB stick so I'd figured to see if I could get this working in combination with domoticz to see if this can be a nice cheap start for some home automation. I plugged in the device and in the dmesg log I can see that it is found. However recognising the device not much else happens. I suspect this is because a lack of drivers. The device was previously used on a raspberry pi and there it was instantly recognized and "installed". From the logs there I can see that it uses the cdc_acm driver.

Now for my real question. Is this driver available in any of the packages we can install on the Zyxel machines? (I have a NSA310s) I suspect when I install this driver the device will work


Top
 Profile  
 
PostPosted: Tue Feb 13, 2018 7:50 am 
Offline

Joined: Sun Apr 29, 2012 5:24 pm
Posts: 2361
Afaik it wasn't before:
Code:
mkdir -p /ffp/lib/modules/2.6.31.8/kernel/drivers/usb/class
cd /ffp/lib/modules/2.6.31.8/kernel/drivers/usb/class
/ffp/bin/wget 'http://downloads.zyxel.nas-central.org/Users/barmalej2/ffp/0.7/arm/drivers/2.6.31.8/cdc-acm.ko'
/ffp/sbin/depmod -a
mknod /dev/ttyACM0 c 166 0
mknod /dev/ttyACM1 c 166 1
mknod /dev/ttyACM2 c 166 2
mknod /dev/ttyACM3 c 166 3
mknod /dev/ttyACM4 c 166 4

Start udev daemon service if not running. Plug USB.


Top
 Profile  
 
PostPosted: Tue Feb 13, 2018 11:23 am 
Offline

Joined: Sun Feb 05, 2017 12:55 pm
Posts: 24
Thanks I will try this tonight when I'm home.


Top
 Profile  
 
PostPosted: Tue Feb 13, 2018 7:59 pm 
Offline

Joined: Sun Feb 05, 2017 12:55 pm
Posts: 24
Thanks it worked like a charm!


Top
 Profile  
 
PostPosted: Wed Feb 14, 2018 6:23 am 
Offline

Joined: Sun Apr 29, 2012 5:24 pm
Posts: 2361
You're welcome.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: billbillw, Bing [Bot], Darkyputz, Majestic-12 [Bot], MrDini and 96 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group