Change HD Ix4-200d

Post Reply
Posts: 1
Joined: Mon Jun 22, 2015 3:24 pm

Change HD Ix4-200d

Post by Ix4BrunoMendoza » Mon Jun 22, 2015 3:28 pm

Sorry for the inconvenience, but need a lot of help.
My ix4-200d is presenting failure in 3 of the 4 discs.
My big question is: Can I change only the three who are failing even for a different model that will stay in it?
Or need to change a model exactly like the one to stay in it?
And another hypothesis, if I need to change so that they are equal 4 models, which model I could're putting? Anyone 1TB 7200 RPM or need to put with the same configuration that is already in storage with 1TB 5900 RPM Seagate Barracuda?
Thanks for attention

Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: Change HD Ix4-200d

Post by Mijzelf » Thu Jun 25, 2015 1:16 pm

Normally you can mix up disks of different brands in a Linux software raid array. I can't think of a reason why you couldn't do it here.

But isn't it strange that you have 3 failing disks out of 4? Do those disks also show up faulty in another device? Else I'd suspect the nas itself.

Post Reply