Storcenter ix4-200d Cloud Edition Brick :(

Post Reply
Galaxy2004
Posts: 1
Joined: Sun Nov 15, 2015 9:38 pm

Storcenter ix4-200d Cloud Edition Brick :(

Post by Galaxy2004 » Sun Nov 15, 2015 9:46 pm

hi,

I have Iomega SC ix4-200d cloud edition Nas Product, I replaced all disk and flashed with this file emctools.7z by mistake :shock:
shows only IOMEGA logo, device dont start
can I rescue ?

TY.

Mijzelf
Posts: 6203
Joined: Mon Jun 16, 2008 10:45 am

Re: Storcenter ix4-200d Cloud Edition Brick :(

Post by Mijzelf » Mon Nov 16, 2015 8:06 pm

Yes, can be done, but you'll need serial access, using some 3.3V TTL cable. The problem is that the CE uses another flash layout, which is imposed by the bootloader. Now a part of the firmware didn't fit, and the box can't boot. By uploading kernel and initrd over TFTP, you can get the box booted, and then you can provide the right imager stick.

Post Reply